
60
6. Make sure after cleaning, that the contactors
inside the power cord connector socket are dry,
clean and bare. If necessary, wipe the metal parts
inside the power cord connector socket (pins)
bare and dry carefully.
7. If you have removed the wok base for clea-
ning, then assamble the wok base again (see:
›Assembling the wok base‹).
8. If cleaning is necessary, wipe the temperature
control probe with a slightly damp cloth.
REMOVING THE WOK BASE
To remove the base for cleaning:
1. Remove the lid from the wok and ensure the
temperature control probe has been removed
from the probe socket. Turn the wok upside down
as in the picture A. Turn the quick release knob
counter clockwise as shown by the arrow in the
picture B.
2. Lift the base from the wok, lifting over the pro-
be socket, as shown in the picture C. The wok
base and bowl should be washed with hot soapy
water. Dry thoroughly.
Note:
To extend the life of the non-stick coating, we
recommend that the wok bowl, base and lid be
washed by hand. However, the wok bowl and
lid are dishwasher safe. The recessed heating
element in the wok bowl is completely sealed
so it is safe to immerse in water. The wok base
should not be placed in the dishwasher.
WARNING
: The wok should never be opera-
ted without the wok bowl and base fully assem-
bled and locked into place.
Picture E
Picture D
Picture C
Picture B
Picture A
Содержание DesIgn Wok Advanced Pro
Страница 29: ...29 REZEPTIDEEN...
Страница 71: ...71 RECIPES...