49
parts that are not recommended by the manufacturer or damaged in
any way may result in injuries to persons and/or damage.
• Check the entire appliance regularly for proper operation—especial-
ly the power cord (e.g. check for distortion, discolouration, cracks,
leaks). Do not operate the appliance, when the appliance or any part
of it is likely to be damaged, to avoid risk of fire, electric shock, or any
other injuries to persons and/or damage. The appliance or its parts
are likely to be damaged, if the appliance has been subject to inad-
missible strain (e.g. overheating, mechanical, or electric shock), or if
there are any perceptible damages, or if the appliance is not working
properly. If one of these cases occurs during operation, immediately
unplug the appliance. Get in contact with an authorized service centre
for examination and/or repair.
• If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order to
avoid a hazard.
• Operate the appliance on a well accessible, stable, level, dry, and
suitable large table or counter that is resistant against water and heat.
Always keep the appliance and the table or counter clean and dry,
and wipe off spilled liquids immediately. Do not place the appliance
on a metal surface (e.g. sink) for operation. Do not place the appli-
ance on the edge of the table or counter. Do not place any valuable
or delicate objects near the appliance during operation. Always keep
the appliance clean and dry and wipe off spilled liquids immediately.
Do not operate the appliance on metal surfaces
(e.g. sink), becau-
se in combination with moisture, metal surfaces may case high risk of
electric shock.
• Do not place the appliance or any part of it in a range, or on or near
hot surfaces (e.g. burner, heater, or oven). Do not use the appliance
or any parts or accessories of the appliance with any other device or
for any other purpose than described in this booklet.
• During operation keep the appliance in an appropriate distance to
any sensitive objects of at least 15 cm on each side, to avoid damage
due to heat and moisture. Ensure free access to the operating elements