86
TROUBLESHOOTING
Problem
POSSIBLE CAUSES
WHAT TO DO
The Hot Water LED flashes when the
machine is turned On.
Hot Water dial is Open.
Turn the Hot Water dial to the CLO-
SED position.
The Steam LED flashes when the
machine is turned On.
Steam Lever is Open.
Move the Steam Lever to the CLO-
SED position.
Water does not flow from
the group head.
Machine has not reached opera-
ting temperature.
Allow time for the machine to reach
operating temperature. The POWER
light will stop flashing when machine
is ready.
Water tank is empty.
Fill Tank.
Water tank not fully inserted &
locked.
Push water tank in fully and lock
latch closed.
FILL TANK On in LCD display, but
water tank is full.
Water tank is not fully inserted
and locked into position.
Push water tank in fully and lock
latch closed.
No Steam or Hot Water.
Machine is not turned on.
Ensure the machine is plugged in,
switched On at the power outlet and
the POWER button is On.
No Hot Water.
Water tank is empty.
Fill water tank.
No Steam.
Steam Wand is blocked.
Use the pin on the cleaning tool
to clear the opening. If the steam
wand continues to be blocked remo-
ve the tip of the steam wand using
the spanner in the cleaning tool and
soak in hot water.
The machine is ‘On’ but ceases to
operate.
Turn machine Off. Wait for 60
minutes and turn machine back On.
Steam pouring out of group head.
Turn machine Off. Wait for 60
minutes and turn machine back On.
Espresso only drips from the portafil-
ter spouts, restricted flow.
Coffee is ground too finely.
Use slightly coarser grind.
Too much coffee in the filter
basket.
Lower dose of coffee.
Coffee tamped too firmly.
Tamp between 15-20kgs of pres-
sure.
The Dual Wall filter basket may
be blocked.
Use the fine pin on the cleaning tool
to clear the outlet hole on the under
side of the filter basket.
Содержание DESIGN ESPRESSO MASCHINE ADVANCED CONTROL
Страница 91: ...91...