30
31
minutes on maximum power to avoid overheating. After 15 minutes turn
off the appliance and let the motor cool down for several minutes before
continuing operation. with normal load the permanent running time is 30
minutes.
movABle AnD shArP-eDgeD PArts – risk oF inJUrY
• Never put fingers, wooden spoons or other foreign objects (such as hair, clothing,
brushes, cloths) into the feed chute or the holes of the grinding disc when the appli-
ance is plugged into the power point. Always ensure that there are no foreign
objects (such as bones, stems of vegetables or wooden spoons) in the feed chute
before turning on the appliance. Only use the provided pusher to push food through
the feed chute. While proceeding do not push the pusher too hard down to avoid
blocking the motor.
• Take care handling the crossed-blade knife because it is very sharp.
• Never hold your face or other body parts over the feed chute when the motor is
running because little pieces of food could be thrown out of the feed chute.
imPortAnt sAFegUArDs For All electricAl APPliAnces
• Always unwind the power cord completely before installing the appliance.
• Place the appliance close to a power outlet and connect it directly without using
any extension cords to avoid additional risks of injury through fire or voltage.
• Only install the appliance in proper form secure grounding receptacle with ade
-
quate electric power supply (alternating current; 230 V, 50 Hz) and ground fault
circuit interrupter. You should also install a fuse with a release current of maximum
30mA. If necessary ask your electrician for help.
• Never pull, rip, bend, clamp, squish or knot the power cord. Pay attention to the
power cord not hanging of the table. Attend to nobody getting caught in loops of
the power cord or pulling the appliance of the work space. When pulling the plug
always catch hold of the enclosure of the plug.
