26
27
Design mincer ADvAnceD (stAnDArD size 8)
Please read all the advice and instructions with care and keep the manual.
The mincer is used for mincing meat (uncooked or cooked) and soft vegetables.
Please prepare the ingredients before filling them into the feed chute. Using the
pusher you press the food slowly into the worm which pushes it against the spinning
crossed-blade knife.
The knife and the worm are driven by a 350 watt induction motor (max. 1,28 Nm).
The finished mince discharges through the grinding disc. The appliance has an over-
load protection which prevents the motor from overheating.
The appliance is maintenance-free, very insusceptible and easy to use. All parts that
come into direct contact with food are easily to remove and easy to clean. No extra
tools are necessary for assembling or disassembling the appliance.
imPortAnt instrUctions
Attention:
Always ensure that the appliance is turned off (the control
switch should be in stAnDBY position) before connecting the plug to the
power outlet.
• Never assemble or disassemble crossed-blade knife, worm or grinding
disc when the plug is connected to the power outlet to avoid personal
injury.
• Before first use rinse all the parts of the appliance with water that come into contact
with food and clean them with dishwashing detergent.
note:
The display is illuminated only when the plug is connected to the power outlet. The
appliance will turn on only when the plug is connected to the power outlet.
Attention:
To avoid damage, DO NOT use any abrasive cleaners, corrosive
chemicals (i.e. disinfectants, bleach) or cleaning pads for operation or cleaning.
NEVER clean or operate the appliance or parts of the appliance with abrasive or
hard sharp-edged items.
never put the motor housing or the accessories in
the dishwasher for cleaning! this will cause discolouration and corrosion
and damage the motor.
• To avoid personal injury always turn the appliance off by turning the control switch
to STANDBY, wait for the motor to stop completely and pull the plug before assem-
bling or disassembling, cleaning or moving the appliance.
• While proceeding
DO NOT push the pusher too hard down to avoid blocking the
motor. Only use the provided pusher to guide food through the feed chute.
• The mincer cannot mince hard or stingily ingredients (for example: bones, nuts,
