gassero ALUBOX X-treme Series, Инструкция по установке и эксплуатации

Страница: 22 / 48

4.3.1 FLUE TYPES
B23 = It is a flue system that takes the combustion air from the environment and throws flue gas to
the outside.
C43 = It is a flue system that takes the combustion air from the outside and throws flue gas to the
outside with seperate flue pipes.
C53 = It is a flue system that takes the combustion air from the outside and throws flue gas to the
outside with the vertical and horizontal concentric flue pipe system.
C63 = It is a flue system that flue pipes are not supplied by the manufacturer. It has to be applied
according to one of the applicable flue systems which are mentioned in technical table in flue types
section with CE certified flue pipes.
C83 = It is a flue system which takes the combustion air from the outside with horizontal flue pipes
and throws flue gas to the self contained (negative pressure) chimney.

For the operation of the boiler, a grounded electrical supply 230 VAC 50Hz is required (tolerance must
be between -15% ve +10% ).

Electric supply of the boiler must be cut off via a fuse during the maintenance.

Electrical operations must be made by authorized technical personal in accordance with regulations
and standards.

Cables should not be passed close to hot surfaces (such as hot water pipes).

L (phase), N(neutral) and grounding connections must be made properly.

All cables must be fitted with a ferrule.
The manufacturer cannot be held liable for damages
caused by negligence or incorrect operation in the
earthing of the boiler.
4.4 ELECTRICAL CONNECTIONS
21