Next is the setting for minimum pump speed during the start.
Only adjust this if the combustion is slow to get going.
125 is the default and it increments at 25 a time with + and – buttons. Too
high a setting will make flames at the starting or cool the burner too much
and stop it working.
Press the > button to continue
Now we come to Glow Plug Power. It should be set as low as possible to
still function.
Default is 6 / 6.2v
Only adjust this +/- if the glowplug is not able to ignite the fuel.
This could be seen by a hissing sound at the start and white smoke from
exhaust. In this case, adjust upwards by 0.2v Having too high a setting
shortens the life of the glowplug.
There are no more functions to adjust in this branch so exit by pressing >
until you return to the opening screen.
Press the > button twice to get back to the main navigation Menu.
Press the button under the INFO option
Timer screen.
“TimerServ:” shows the total runtime on the engine. “Last:” shows the
duration of the last run in secs, and “Cy:” the total number of times the
engine has reached idle on a start.
RX Errors screen
This shows any time when the receiver signal has been lost or outside the
normal range, glitches etc, during the last run.
Normally shows 0 or low number. Is reset each new start.
Page 33
