11
10
Rotating Heater Head, FIG F
NOTE: Ensure you have a minimum of 2m clearance
to rotate the head otherwise the heater head will hit the
obstacle.
Warning: Always have the heater turned OFF before
rotating the heater head.
To rotate the heater head;
1. Loosen the screw knob (#33), do not remove.
2. Slowly and gently move the top part of the stand and
heater head left or right.
3. Once new position is correct tighten the screw
knob (#33).
Cleaning
Always ensure that the heater has been left for one (1)
hour to cool before cleaning.
1. Turn off and disconnect from mains power,
allow to cool.
2. Wipe unit over with a damp clean soft lint free
cloth.
3. For stubborn marks you can use a mild dish
washing solution on a damp clean soft lint free
cloth.
NEVER allow water or a mild dish washing solution to
enter or drip onto the heater.
NEVER use solvents, e.g. Petrol, Toluene, Methylated
Spirits etc to clean the heater, as these will damage the
surface finish and may cause a fire when unit is next
used.
Replacing Parts
If replacement parts are required, including light,
bluetooth speaker or digital display, please contact
Customer Service for your closest Service Agent.
There are no user serviceable parts. All servicing and
replacement parts must be installed by a service agent
or qualified person to avoid electrical hazards.
FIG F
33
