BRAKE SYSTEM 12
63
12.1
Anti-lock braking system (ABS)
H01077-10
The ABS module
1
, consisting of a hydraulic unit, an ABS control unit,
and a return pump, is located under the seat. One wheel speed sen-
sor
2
is located in each case on the front and the rear wheel.
Warning
Danger of accidents
Changes to the vehicle impair the func-
tion of the ABS.
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have been
approved and recommended by GASGAS Motorcycles.
–
Only use tires/wheels approved by GASGAS Motorcycles
with the corresponding speed index.
–
Maintain the specified tire pressure.
–
Ensure that service work and repairs are performed profes-
sionally. (Your authorized GASGAS Motorcycles workshop
will be glad to help.)
ABS is a safety system that prevents locking of the wheels when driving
straight ahead without the influence of lateral forces.
Warning
Danger of accidents
Driving aids can reduce the probability of
a fall only within physical limits.
It is not always possible to compensate for certain riding situ-
ations, for example with luggage loaded with a high center of
gravity, varying road surfaces, steep descents or full braking
without disengaging the gear.
–
Adapt your riding style to the road conditions and your driv-
ing ability.
Warning
Danger of accidents
An incorrectly selected ABS mode makes
control of the vehicle considerably more difficult.
The ABS modes are each only suitable for certain conditions.
–
Always select an ABS mode that is compatible with the sur-
face of the ground.
ABS has two operating modes: the
Road
and
Supermoto
ABS modes.
In ABS mode
Road
, the ABS controls both wheels.
In ABS mode
Supermoto
, the ABS only controls the front wheel. There
is no ABS control on the rear wheel. The ABS warning lamp
3
flashes
slowly to remind you that the
Supermoto
ABS mode is enabled.
Info
In the
Supermoto
ABS mode, the rear wheel may lock and there
is a risk of falling.
ABS mode
Supermoto
is only available in riding mode
SPORT
.
The ABS operates with two independent brake circuits (front and rear
brakes). When the ABS control unit detects a locking tendency in a
wheel, ABS begins regulating the brake pressure. The control function
causes a slight pulsing of the hand and foot brake levers.
Содержание SM 700 2023
Страница 1: ...OWNER S MANUAL 2023 SM 700 Art no 3215134en...
Страница 2: ......
Страница 128: ...3215134en 3215134en 21 11 2022 Stallhofnerstra e 3 5230 Mattighofen Austria http www gasgas com...