GAS GAS SM 700 2023, Руководство пользователя

Страница: 93 / 128

COOLING SYSTEM 15
91
K00402-10
–
Position the motorcycle upright.
–
Position an appropriate container under the engine.
–
Remove screw
1
. Take off the radiator cap.
–
Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw plug, water
pump drain hole
M10x1 15 Nm (11.1 lbf ft)
15.5 Filling/bleeding the cooling system
Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
V02747-11
–
Stand the motorcycle on a level surface using the side stand.
–
Remove radiator cap
1
.
–
Refill with coolant.
Coolant ( p. 116)
–
Completely fill the radiator with coolant.
–
Mount radiator cap
1
.
V02746-11
–
Remove the cover of the compensating tank.
–
Add coolant up to the marking
A
.
–
Mount the cover of the compensating tank.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Start the engine and allow it to warm up.
–
Stop the engine and allow it to cool down.
–
Check the coolant level. ( p. 89)