GAS GAS SM 700 2023, Руководство пользователя

Страница: 77 / 128

WHEELS, TIRES 13
75
–
Mount and tighten screw
7
.
Guideline
Screw, wheel
speed sensor
M6 6 Nm (4.4 lbf ft)
Loctite ® 243™
V02774-10
–
Position the brake line in the guide.
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
Finishing work
–
Remove the rear of the motorcycle from the wheel stand. ( p. 47)
–
Check the chain tension. ( p. 55)
13.5 Checking the rear hub damping rubber pieces
Info
The engine power is transmitted from the rear sprocket to the rear wheel via the 6 damping rubber pieces. They
eventually wear out during operation. If the damping rubber pieces are not changed in time, the rear sprocket car-
rier and the rear hub will be damaged.
Preparatory work
–
Raise the motorcycle with the rear lifting gear. ( p. 46)
–
Remove the rear wheel. ( p. 73)
602568-10
Main work
–
Check bearing
1
.
» If the bearing is damaged or worn:
–
Change the bearing of the rear sprocket carrier.
–
Check damping rubber pieces
2
of the rear hub for damage and
wear.
» If the damping rubber pieces of the rear hub are damaged or
worn:
–
Change all the damping rubber pieces of the rear hub.
602569-11
–
Lay the rear wheel on a workbench with the rear sprocket facing
upwards and insert the wheel spindle in the hub.
–
To check play
A
, hold the rear wheel tight and try to turn the rear
sprocket with your hand.
Info
Measure the play on the outside of the rear sprocket.
Play of damping rubber pieces
on rear wheel
≤
5 mm (
≤
0.2 in)
» If clearance
A
is larger than the specified value:
–
Change all the damping rubber pieces of the rear hub.