GAS GAS ENDURO 4T EC 2014, Руководство пользователя

Страница: 62 / 77

Owner´s manual
-62-
1 2
MARZOCCHI 48
3
4
ÖHLINS RXF
6
5
7 8
Suspension settings
Front Fork (Marzocchi 48)
• Rebound (3) - located at the bottom of the fork.
• Compression (1) - located at the top of the fork.
• Spring Preload (2) - by the PFP system (Progressive Floating Piston) located
in the upper part of the fork, each turn equals approx. 1mm of preload.
• Air purge (4) - located at the top of the fork.
- 250/300cc: 320 ml. (EBH16 7,5WT)
- 450cc: 350 ml. (EBH16 7,5WT
Front Fork (Öhlins RXF)
• Rebound (5) - total 23 clicks, located at the bottom of the fork.
• Compression (6) - total 23 clicks, central screw, located at the top of the
fork.
• Air purge (7) - left screw, located at the top of the fork.
• Spring Preload - not externally adjustable.
• Oil Volume - 300 ml. (Öhlins 01312)
WARNING
The screw on the right side (8) of the compression adjustment should not be
unscrewed. It isn’t an adjustment.
The oil level can be adjusted. A change in oil level does not affect the first part
of fork travel, but it will affect at the final fork travel.
When increasing the oil level the suspension is more progressive and front fork
action is harder at the end of the fork travel.
When you decrease the oil level the suspension is less progressive and fork
action is softer at the end of the fork travel.
If it is fork bottoming, it is recommended to increase the oil level slightly
(approx. 10 mm.)
WARNING
Ensure that both fork legs have the same level of oil for a regular suspension
behavior.
ProCarManuals.com