GAS GAS ENDURO 4T EC 2014, Руководство пользователя

Страница: 39 / 77

Owner´s manual
-39-
1
2
1
6.-CARBURETOR
Idling adjustment
It is carried out by adjusting the iddlescrew (1)
1. Warm up the engine. Turn the free closing screw to adjust the idling speed.
If you don’t have references turn screw until the engine stops.
2. Tighten slightly the idle screw.
3. Accelerate and slow down a few times to ensure that the idling does not
change. Readjust if necessary.
DANGER
Driving with damaged throttle cables can be dangerous.
Check that throttle cable remains a minimum clearance of 3 mm in the throttle
control.
With the engine idling, turn the handlebar to both sides. If the handlebar mo
-
vement changes the idle and acceleration, the throttle cable is not properly
adjusted or is in poor condition. Be sure to correct this before riding.
Maintenance
7.-ENGINE OIL
For properly function of transmission and clutch, maintain the optimum oil level
and change it periodically. A motorbike with insufficient oil, damaged or polluted
oil, can accelerate wear and damages in engine.
Checking the oil level
1. If the bike has been used wait a few minutes.
2. Check the oil level through the level indicator (1).
3. The oil level must be between the maximum and minimum.
4. If the level is too high, remove the excess through the draining plug (2).
5. If the level is too low, add the necessary oil amount through the plug. Use
the same type and brand of oil that the engine had already.
Engine oil
Recommended oil: 5W40
Capacity: 1200 cc
NOTE: To get the right engine oil temperature and accurately oil level measure,
the engine should have been cooled down completely, and must then be heated
again for a few minutes to the normal operating temperature.
ProCarManuals.com