Gas Detection (Australia) Pty Ltd Page 25 of 44
M-GDA-3000 Rev 1
10.
Detector activation Flow and KEY operation
10.1. Sensor activation Flow
Timeout of Level1 and Level2 is 10 seconds, and I hour in the Calibration and Test Mode of
Level2.
[Figure 13. Detector workflow ]
10.2. Sensor KEY configuration and description
Item
Name
Description
FUNC
Function Key
Sensor Mode entry function (more than 2 seconds of touch with
Magnet-bar in Measuring Mode). Entry to the next step of Level2
and storage of
setting value.
RESET
Reset Key
Moving back to the previous step before the entered LEVEL
↑
Up Key
Change to the next step after LEVEL1, and plus change of Level2
setting.
↓
Down Key
Change to previous step before LEVEL1; minus change of Level2
setting.
※
Sensor Power ON followed by simultaneous input of Reset Key and Function Key will result
in Factory Set in internal setting.
