Gas Detection GDA 3000, Руководство по эксплуатации, Страница: 35 / 44

Gas Detection (Australia) Pty Ltd Page 35 of 44 M-GDA-3000 Rev 1
11.8. How to use VERSION MODE

After password has been confirmed, the detector goes into
level1 mode.
 Select VERSION mode by touching “↑” or “↓” switch.

At this moment, if function key is touched, the detector will go
into IR SENSOR DATA MODE submenu.

In this screen, program version of the product is shown.

A message shown in the first row indicates program version of
GDA3000A.

A message shown in the second row indicates program version
of GSA920A.

It is H/W version.

It is HART device version which has been configured.

It is HART protocol version which has been configured.
 Touch “FUNC” switch, then the detector’s mode will return back
to VERSION MODE.