Garten Meister GM-LB2600, Перевод оригинального руководства пользователя

Страница: 33 / 80

GB | 33
12. Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equip-
ment fails to work properly. If the problem still persists after working through the list, please contact your nearest ser-
vice workshop.
Fault Possible cause Remedy
Machine does not start. • Air filter is contaminated.
• Fuel filter is blocked.
• Lack of fuel supply.
• Fault in the fuel line.
• Starting device is faulty.
• Engine stalled.
• Spark plug cap not attached.
• No spark.
• Engine faulty.
• Carburetor faulty
• Blowing/suction pipe is not completely
fitted
• Clean/replace the air filter.
• Clean or renew the fuel filter.
• Re-fuel.
• Check the fuel line for kinks or damage.
• Contact the service centre.
• Remove the spark plug, clean and dry it;
then pull the starter rope several times;
re-fix the spark plug.
• Check the correct position of the spark
plug cap.
• Clean the spark plug or replace it, if
applicable. Check the ignition cable for
damage.
• Contact the service centre.
• Contact the service centre.
• Install a two-part blowing/suction pipe
Machine starts but stops
again.
Wrong carburetor setting (idle speed). Contact the service centre.
Machine works with inter-
ruptions (sputtering).
• Carburetor set up incorrectly.
• Spark plug is sooty.
• On/off switch faulty.
• Contact the service centre.
• Clean the spark plug or replace it.
• Contact the service centre.
Smoke is generated • Wrong fuel mix.
• Carburetor set up incorrectly.
• Use two-stroke mixture at a ratio of 40:1.
• Contact the service centre.
Machine does not work at
full power.
• Air filter is contaminated.
• Carburetor set up incorrectly.
• Collection bag is full
• Collection bag is dirty
• Selector switch in incorrect position
• Device clogged up or blocked by foreign
bodies
• Clean the air filter or replace it.
• Contact the service centre.
• Check the exhaust.
• Empty collection bag
• Clean collection bag
• Set selector switch to the suction symbol
• Remove plug or blockages (see chapter
Cleaning and Maintenance)
11. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be re-
used or recycled.
The equipment and its accessories are made of vari-
ous types of material, such as metal and plastic. De-
fective components must be disposed of as special
waste. Ask your dealer or your local council.