Magnum 10ETS / 10XTS Installation and User Guide
06/12
1
www GarrettCom com
.
.
1.0 SPECIFICATIONS
1.1 Technical
Specifications
Serial Protocols:
Async to TCP/IP – including Modbus gateway for connectivity to serial
Modbus devices and to other Modbus Ethernet devices
TCP/IP to serial/reverse terminal server, Serial Multipoint & Multimaster
Topologies
PPP with authentication
Performance:
Serial DB9 Ports:
RS232 only or RS232/RS485/RS422 software selectable
DB9 interface. Serial data rate from 300 bps to 230.4 kbps.
Data length - 1-32 bits
Serial RJ45 Ports:
Same functionality as DB-9 ports (RJ45 pinout conforms
to EIA-561 DTE standard)
RJ45 Ports:
100 or 10 Mb speed, full- or half-duplex mode, per port,
individually determined.10/100 auto-negotiating & auto-cross
Fiber Ports, 100 Mb (multi-mode and single-mode):
Configurable in modules. at 2 per module, or SFF (Small Form Factor) for
high fiber port density, 4 per module. Each FDX or HDX,
default is FDX mode.
WAN Ports:
T1/E1: 1.544 Mbps / 2.048 Mbps G.703
Network Standards and Compliance, hardware:
Ethernet V1.0/V2.0 IEEE 802.3: 10BASE-T,
IEEE 802.3u: 100Base-TX, 100BASE-FX, Auto-negotiation on TP
IEEE 802.1p: Priority protocol
IEEE 802.1d: Spanning Tree protocol
IEEE 802.1w: Rapid Spanning Tree protocol
IEEE 802.1q: VLAN Tagging, maximum 32 VLANs
IEEE 802.3x: Flow Control
Maximum 10 Mbps Ethernet Segment Lengths:
Shielded twisted pair
- 150 m (492 ft)
10BASE-FL multimode fiber optic
- 2 km (6562 ft)
Maximum Standard Fast Ethernet Segment Lengths:
10BASE-T (CAT 3, 4, 5 UTP)
- 100 m (328 ft)
100BASE-TX (CAT 5 UTP)
- 100 m (328 ft)
Shielded twisted pair
- 150 m (492 ft)
100BASE-FX, half-duplex, multimode
- 412 m (1350 ft)
100BASE-FX, full-duplex, multimode - 2.0 km (6562 ft)
100BASE-FX, half-duplex, singlemode
- 412 m (1350 ft)
100BASE-FX, full-duplex, singlemode
- 20.0 km (66K ft)
100BASE-FX, full-duplex, Long Reach
- 40.0 km (122K ft)
