Garrett MAGNASCANNER CS 5000, Руководство пользователя

Страница: 14 / 48

MAGNASCANNER CS 5000
OWNER S MANUAL
' 2000 GARRETT METAL DETECTORS, INC.
4/30/00 PN 11674XX
Revised
11
If an error occurs, follow the procedures noted above and press OPERATE to retest.
You will be prompted SELF-TEST OK when all functions are correct. If problems contin-
ue to occur, consult with your supervisor or factory representative.
The self-diagnostic/reporting cycle described above will be carried out automatically by
the unit any time the
OPERATE touchpad is pressed.
4.1.3. FATAL ERRORS
The system periodically performs several of the tests described above. Because Errors
1,4 and 5 severely limit or prohibit acceptable performance of the Magnascanner, they
are considered
Fatal Errors .
If a fatal error is encountered because of component failure, broken wire, etc., the audi-
ble alarm will sound and the LED display will begin to flash. To remedy the situation,
press the
OPERATE touchpad, which will initiate the self-diagnostic routine. Note the
error(s) that will appear on the LED and follow instructions stated above. If a solution is
not obvious, it will be necessary to follow the repair procedure described on Page 22.
4.1.4. NON-FATAL ERRORS
Errors 2, 3, and 6 may also occur. Since these failures do not limit the system s detec-
tion capabilities, the unit will continue to operate. Although the equipment is usable, it
is important to identify and correct all problems as soon as possible in order to maintain
full performance capabilities.
Another error indication is that of a warbling audio when a person is in the archway (or,
for an extended time if the IR Analysis is switched off). This sound indicates that a
large metallic object, such as a wheelchair, stroller, or very large hand-carried object,
has overloaded the equipment to a degree that it cannot function accurately. If this
sound is heard, the operator should see that the problem object is moved away, and
the person being inspected should be required to pass through the archway again after
the green
READY light appears.