![background image](http://html1.mh-extra.com/html/medem/agds-m/agds-m_installation-instructions-manual_1759898001.webp)
1
00253
AGDS-M
Installation Instructions
The AGDS-M is a four channel gas detection system. Up to four low voltage detectors can be connected for
the detection of natural gas, LPG, CO, CO2 and Oxygen.
In the event of a high alarm from one of the detectors, the system will indicate locally and provides contacts
for remote monitoring or to activate a beacon/sounder or fan.
The system will automatically reset after the target gas detected has fallen below its alarm level. Low alarm
indication is also given.
Before commencing installation please familiarise yourself to the equipment by reading the comprehensive
installation instructions. If in doubt then please call 0161 233 0600. Out of hours please call 07894 684080 or
07843 355163.
It is a statutory requirement that this safety system is installed and commissioned
to the satisfaction of the manufacturer.
A commissioning certificate must be issued to the end user along with instructions for the operation of the
equipment.
As the Manufacturer Medem UK should commission this safety system whereupon a commissioning report
will be forwarded to the installing agent who should provide a copy to the end user.
At the point of our commissioning an individual serial number will be attached to the system along with a 24
help line number. Photos and all relevant information for the installation will then be stored on the Medem
site database to be accessed in the event of a call on the 24 hour help line. The warranty period for the
panel will then be extended to Ten years (detectors warranty is two years).
•
Gas Detection (up to 4 detectors )
•
Natural gas, LPG and carbon monoxide
•
2 x BMS relay (selectable alarm status inc. high
alarm)
•
5 year warranty - 10 years when commissioned
AGDS-M features