Pin
p
oint
er
Metal Detector
(Model: U6037)
INTRODUCTION
Thank you for choosing UCTRONICS!
UCTRONICS Pin
p
oint
er
Metal Detector is a highly
sensitive, hand-held instrument designed to pinpoint
metallic objects during treasure recovery, jewelry
hunting, relic hunting, gold prospecting and utility
applications.
It is intended for use in conjunction with a ground
search metal detector to aid in the recovery of
metallic targets. With a pinpointing tip plus a
scraping blade with side-scan capability, the detector
is very effective in detecting even small size metallic
objects.
FEATURES
Model Name:
UCTRONICS Metal Detector
Model Number:
U6037
Operating
Temperatures:
-35
℉
(-37
℃
) ~ 158
℉
(70
℃
)
Operating
Frequency:
12KHZ
Water and Dust:
Meets IEC 60925
IP 65 standards
Tuning:
Automatic
Indicators:
Proportional
audio/vibration
pulse rate
Controls:
Power switch
Dimensions:
Length: 9
’’
(22.9 cm)
Thickness: 1.5
’’
(3.8 cm)
Tapered to 0.875
’’
(2.2 cm)
Weight:
7.0oz./200g (with battery inside)
5.84oz. /166g (without battery)
Battery:
Single 9V
COMPONENTS & FUNCTIONS
Power Switch
–
Press and release the power
button on while holding the detector away from
metallic objects. The white LED will illuminate and
one brief audio beep will occur, indicating the
detector is ready for use.
Audio and Vibrate Alerts
–
The speaker will
provide a clear audible sound and the detector
vibrator motor also activates when a metallic target
is detected.
Scraping Blade
–
Ideal for sifting through dirt
while searching for the target. Its 360
︒
-side-scan
metal detection allows the detector to alarm when
the blade is passed in close to a metallic target.
LED Light
–
A power-on indication and acting as
a flashlight when needed.
Audible Low Battery Alert
–
The detector will
sound an alternative dual-tone alarm when the
battery becomes low.
Battery Cover
–
Makes the battery
installation/replacement quick and easy. No other
tools are needed. Rotate the cover counterclockwise
to remove and clockwise to tighten by hand.
Holster
–
Helps secure the detector to any
standard size belt.
OPERATING INSTRUCTIONS
Basic Recovery Method
–
Once you have located
a target with your ground search metal detector, dig
the recovery hole or remove the plug of the earth.
Then you could use UCTRONICS pinpoint metal
detector to locate your metallic target precisely.
