CAUTION! Use of this equipment in a manner not specified by the
manufacturer may result in damage to property or injury to per-
sons.
Technical Specifications
Electrical: 100 — 240 V~ +10% — -15%
1.0 — 0.5A
50/60 Hz
Installation Category: II
Pollution Degree: 2
Maximum Relative Humidity: 95% non-condensing
Operating Temperature: -20 — 70C
Maximum Altitude: 3000 meters
Place the PD 6500 in an area where it is protected from direct rain,
mist and/or condensation and position it on a level, stable floor free
from vibration.
DO NOT place the PD 6500 next to telephone systems, television
monitors, electric motors, transformers, power cables, or control
circuits; excessive electrical noise will trigger bar graph activity.
CAUTION! PD 6500 must be firmly anchored to the floor or optional
stabilizer base attached to reduce the risk of injury to persons or
property damage due to accidental knock down.
Do not drive nails or drill holes into the side panels.
Screen patrons only when the green ready light is on to ensure
proper operation.
Test the unit daily and whenever the screening environment
changes.
NOTE:
Security metal detectors are designed for use
within a total security screening plan.
It is the end user’s responsibility to define the
overall plan and ensure that it operates effectively.
MAGNASCANNER PD 6500
OWNER’S MANUAL
©2000 GARRETT METAL DETECTORS, INC.
6/19/00
PN 1531100
1
Read Thoroughly Before Operating
Alternating current
Protective conductor
terminal
CAUTION! Risk of
electric shock
CAUTION! Refer
to accompanying
documentation
SYMBOLS:
