Garrett 11674xx, Руководство пользователя

Страница: 40 / 48

37
MAGNASCANNER CS 5000
OWNERS MANUAL
' 2000 GARRETT METAL DETECTORS, INC.
4/30/00 PN 11674XX
Revised
11.3.1. CASE I
Description:
¥ Two (2) units which interfere with each other;
¥ Both units plugged into same power line (same circuit breaker).
Procedure:
¥ Set both units to MASTER ;
¥ Set one unit to CHANNEL A ;
¥ Set one unit to CHANNEL B .
11.3.2. CASE II:
Description:
¥ Three (3) or more units that interfere with each other;
¥ All units plugged into same power (same circuit breaker).
Procedure:
¥ Set next unit to CHANNEL D ;
Repeat pattern of CHANNELS A,C, and D for any additional units.
11.3.3. CASE III:
Description:
¥ Three (3) or more units that interfere with each other;
¥ Units not plugged into the same power line or units with battery back-up option
which may be required to operate in the absence of AC power.
¥ With the exception of the first and last units, the SH-3 jumper must be removed.
This jumper is located on the Controller Board Assembly. Refer to the drawing for
exact location.
Procedure:
¥ Disconnect units from power line;
¥ Open Access Door of Detection Unit;