6. Internet connectivity
If the ethernet cable is connected to the internet, the
DLM unit will automatically connect through the
cable. If the DLM unit is configured as part of a
connection group through a mesh Wi-Fi then the
DLM unit will automatically be connected via this
mesh Wi-Fi group. The connection status is visible in
the GARO connect app. If a local Wi-Fi is to be
used for internet access, do the following steps:
a. Establish a direct link between the mobile
device, where the app is used, and the load
interface (its built-in access point).
b. To enter the Wi–Fi credentials, scan the QR
code OR enter the SSID and key manually.
c. The app should indicate that a connection
between the app device (mobile phone) and the
load interface is established.
d. Select what type of internet connectivity is
chosen (in this case, local Wi-Fi).
e. Enter the credentials of the local Wi-Fi to use as
internet connectivity, (SSID and password).
f. When Internet is accessed, this is visualized in
the app (the internet icon will turn green).
g. Close the direct connection (to the load interface
access point) to the DLM unit. Once the internet
icon is connected to the charging station, the
app-device (mobile phone) will communicate
with the DLM unit over the internet, so the direct
connection shall be closed.
NOTE
The load interface ID label contains login credentials for
the load interface and should be considered as sensitive
information from a cyber security perspective.
7. Firmware update
Firmware can always be updated, but never
downgraded as this is not allowed due to cyber
security risks. It is highly recommended to enable
automatic update of firmware (default setting).
8. Configuration settings
As the main function of the load interface is to
monitor current, the main setting is to select what
type of input to use. The input type is dependent of
the variant of load interface. i.e. Balance basic or
Balance advanced. Use the guided settings to
define the input to be used. There are several
additional advanced configuration settings that are
possible to adjust with the GARO Connect app. For
information on the different parameters, click the “
I
”
icon.
9. Functional test
Perform the necessary functionality tests such as
testing the load management setup to ensure the
current is limited at high load conditions.
10. Complete the installation.
61
Содержание ENTITY PRO
