OPERATING MANUAL VL7798
UNIVERSAL Ni-Cd BATTERY CHARGER (WITH DISCHARGER)
OPERATION THE RECHARGE
* It can charge 2 or 4 pcs AAA or AA or C size batteries and 1 pc 9V 006P battery
* Insert the batteries into recharge, ensuring contact is good and polarity (+) and (-) is
correct
* Red LED light will show while charging is taking place
* When charging is completed, unplug the charger and remove the batteries
DISCHARGE THE BATTERIES
* It can only discharge 2 or 4 pcs AAA of AA or C or D batteries, except 9V 006P battery.
* Push the "Start" switch, the batteries discharge and yellow LED light.
* When the discharge of batteries is finished the batteries change to charge automatically
and yellow LED is off and red LED light.
* After few minutes of charging push the "Start" switch. If the batteries can not be discharged
and the yellow LED do not light during minimum 10 sec, then the battery is dead, discard it.
WARNINGS
* For indoor use only
* Always remove mains plug from wall socket when not in use or before batteries are inserted
* Covers should be only removed by a qualified electrician - this appliance contains
dangerous voltages
* Do not try to charge "throw away" batteries
* If the supply cord is damaged, it must be replaced by a qualified serviceman because
special tools are required.
* Do not charge longer than indicated in the chart :
Battery type
Charging time
AAA / UM5 Micro (180mAh)
5 ~ 6 hours
AA / UM3 Mignon
500 mAh
700 mAh
14 ~ 16 hours
19 ~ 22 hours
C / UM2 Baby
1200 mAh
1800 mAh
10 ~ 12 hours
14 ~ 16 hours
D / UM1 Mono
1200 mAh
2000 mAh
10 ~ 12 hours
15 ~ 17 hours
BLOCK - AKKU 006P (100mAh)
5 ~ 10 hours
