28
Command Number 299:
Module Enablement
Default Values ----------------------> 0 0 0 0 0 0 0 0
2 9 9
Positions -----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Digit position (1):
Enabling Expander module No. 1
0 = Disabled
1 = Enabled
Digit position (2):
Enabling of Expander module No. 2
0 = Disabled
1 = Enabled
Digit position (3):
Enabling Expander Module No. 3
0 = Disabled
1 = Enabled
Digit position (4):
Auxiliary Source Enabling
0 = Disabled
1 = Enabled
Digit position (5):
Enable Mobile Data Communication Module
0 = Disabled
1 = Enabled
Digit position (6):
Enable Wifi Network Communications Module
0 = Disabled
1 = Enabled
Digit position (7):
Reserved for Future Use
0 = Future Use
1 = Future Use
Digit position (8):
Reserved for Future Use
0 = Future Use
1 = Future Use
Command Number 310:
Subscriber Number For Partition No. 1 Events
Default Values -----------------------------------> 0 0
0
0
3 1 0
Positions -------------------------------------> (1)
(2)
(3)
(4)
Digit positions (1) - (4):
Subscriber Number For Partition No. 1 Events
The code must be 4 digits long. Valid values are 0-F
Command Number 311:
Subscriber Number For Partition No. 2 Events
Default Values ------------------------------>
0
0
0
0
3 1 1
Positions ------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Subscriber Number For Events of Partition No. 2
The code must be 4 digits long. Valid values are 0-F
Command Number 312:
Subscriber Number For Partition No. 3 Events
Default Values ---------------------------->
0
0
0
0
3 1 2
Positions ------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Event Subscriber Number of Partition No. 3
The code must be 4 digits long. Valid values are 0-F
Command Number 313:
Partition Event Subscriber Number No. 4
Default Values ---------------------------->
0
0
0
0
3 1 3
Positions ------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Subscriber Number For Partition No. 4 Events The code
must be 4 digits long. Valid values are 0-F
Command Number 314:
Subscriber Number System Events
Default Values -------------------------------------------> 0 0 0 0 0 0
3 1 4
Positions--------------------------------------------------> (1) (2) (3) (4) (5) (6)
Digit positions (1) - (6):
Subscriber Number System Events
The code must be 6 digits long. Valid values are 0-F
Command Number 340:
Time of First Periodic Test Report Transmission
Default Values ---------------------------------------------> 0
0
0
0
3
4
0
Positions-------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Time of First Test Report Transmission
Valid values are 0-9. Time must be entered in 24 Hs format.
Command Number 345:
Reports 1
Default Values ------> 1 1 1 1 1 1 1 1
3 4 5
Positions----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Digit position (1):
Alarm Reporting/Zone Restoration/Police Verification
0 = Do Not Report
1 = Report Using Scenario No. 1
2 = Report Using Scenario No. 2
Digit position (2):
Zone Alarm Cancellation Report Same options as in Zone Alarm/
Restore Alarm Report
Digit position (3):
Emergency Key Report
Same Options as Alarm Reporting/Restore in Zones
Digit position (4):
Coercion Reports
Same options as in Alarm/Restore Zone Reporting
Digit position (5):
Zone Inhibit/Disable Zone Reporting Same options as in Alarm/
Restore Zone Reporting
Digit position (6):
User Activation/Deactivation Report Same options as in Alarm/Res
-
tore Zones Report
Digit position (7):
Keyswitch Activation/Deactivation Report Same options as in
Alarm/Restore Zones Report
Digit position (8):
Network Fault/Restore Report Digit position (8): Network Fault/Res
-
tore Report
Same Options as Alarm Reporting/Restore in Zones
Command Number 346:
Reports 2
Default values -----> 1 1 1 1 1 1 1 1
3
4
6
Positions --------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Digit position (1):
Battery Fault/Restore Report
0 = Do Not Report
1 = Report Using Scenario No. 1
2 = Reports Using Scenario No. 2
Digit position (2):
Future Use
Digit position (3):
Future Use
Digit position (4):
Fault Report/Restore Sensor-RF monitoring Same options as in
Fault Report/Battery Restore.
Digit position (5):
Low Sensor Battery Report -RF Same options as Battery Fault/
Restore Report
Digit position (6):
Schedule In/Out Report Same options as Battery Fault/Restore
Report
Digit position (7):
Clock Schedule Report
Digit position (8):
Clock Schedule Report
Same options as in Battery Fault/Restore Report
Digit position (8):
Tamper Report Keypad / RF Sensors Same options as in Battery
Fault/Restore Report
Command Number 347:
Reports 3
Default values
---------------------> 1 1 1 1 1 1 1 1
3
4
7
Positions -----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Digit position (1):
Periodic Test Report Report (Manual and Automatic)
0 = Do Not Report
1 = Report Using Scenario No. 1
2 = Report Using Scenario No. 2
Digit position (2)
: Follower Test Report Report Same options as in Periodic Test
Report Report
Digit position (3):
Auxiliary Failure
Same options as in Periodic Test Report Report
Digit position (4):
Auto Arming/Auto Disarming Report Same options as in Periodic
Test Report Report Report
Digit position (5):
Auto Arming Inactivity Timeout Report or
no movement
Same options as in Periodic Test Report Report
Digit position (6):
Manual Test Report
Same options as in the Periodic Test Report Report
Digit position (7):
Fault Report Siren Output Same options as in the Periodic Test
Report Report Report
Digit position (8):
Fault report supervision of Keypads / Expanders and Auxiliary
Source. Same options as Periodic Test Report Report
Command Number 350: F
uture Use.
Command Number 360:
Periodic Test Report Transmission Counters
Default values -------------------------------------------> 1 0 0
0
3 6 0
Positions ------------------------------------------------>
(1)
(2)
(3)
(4)
Содержание PC-900G
