Garnet PC-900G Скачать руководство пользователя страница 24

Страница: 24 / 40

Command Number 193:

Partitioning and Keyboard Attribute Assignment No. 4

Default values ----------------------> 1 0 0 0 1 0 0 0

1 9 3

Positions

-----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)

Command Number 194:

Keyboard Partitioning and Attribute Assignment No. 5

Default values

---------------------> 1 0 0 0 1 0 0 0

Positions

-----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)

Command Number 195:

Partitioning and Keyboard Attribute Assignment No. 6

Default values -----------------------> 1 0 0 0 1 0 0 0

1 9 5

Positions

-----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)

Command Number 196:

Partitioning and Keyboard Attribute Assignment No. 7

Default values -----------------------> 1 0 0 0 1 0 0 0

1 9 6

Positions

-----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)

Command Number 197:

Keyboard Partitioning and Attribute Assignment No. 8

Default values

----------------------> 1 0 0 0 1 0 0 0

1 9 7

Positions

-----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)

Command Number 200:

Keypad Zone Assignment No. 1

Default values ------------------------------------------------------------------------------> 0 0
2

0 0

Positions -------------------------------------------------------------------------------------> (1) (2)

Digit Position (1)- (2):

Keypad Zone Assignment No. 1

The code must be 2 digits long. Valid values are 00 to 32. With the value [00] the

keypad zone will be bypassed.

Note:

Commands 201 through 207 (Keypad Zone Assignments) are programmed

in the same way as the 200th Command.

Command Number 201:

Keypad Zone Assignment No. 2

Default values ------------------------------------------------------------------------------> 0 0
2

0 1

Positions --------------------------------------------------------------------------------------> (1) (2)

Command Number 202:

Keypad Zone Assignment No. 3

Default values ------------------------------------------------------------------------------> 0 0
2

0 2

Positions -------------------------------------------------------------------------------------> (1) (2)

Command Number 203:

Keypad Zone Assignment No. 4

Default values -----------------------------------------------------------------------------> 0 0
2

0 3

Positions -------------------------------------------------------------------------------------> (1) (2)

Command Number 204:

Keypad Zone Assignment No. 5

Default values ------------------------------------------------------------------------------> 0 0

0 4

Positions -------------------------------------------------------------------------------------> (1) (2)

Command Number 205:

Keypad Zone Assignment No. 6

Default values ------------------------------------------------------------------------------> 0 0
2

0 5

Positions -------------------------------------------------------------------------------------> (1) (2)

Command Number 206:

Keypad Zone Assignment No. 7

Default values------------------------------------------------------------------------------> 0 0
2

0 6

Positions -------------------------------------------------------------------------------------> (1) (2)

Command Number 207:

Keypad Zone Assignment No. 8

Default values ------------------------------------------------------------------------------> 0 0
2

0 7

Positions --------------------------------------------------------------------------------------> (1) (2)

Command Number 220:

Assign Zone No. to Module Input No. 1 Expander N° 1

Default values

-----------------------------------------------------------------------------> 0 0

Positions --------------------------------------------------------------------------------------> (1) (2)

Digit position (1)- (2):

Zone No. Assignment to Input No. 1 of Expander Module No. 1

The code must be 2 digits long. Valid values are 00 to 32. With the value [00] the zone

is bypassed.

Note:

Commands 221 to 227 (Assignment of zone no. to input no. 1 of expander module

no. 1) are programmed in the same way as command no. 220.

Command Number 221:

Zone No. Assign. to Input No. 2 of Expander Module No. 1

Default values -----------------------------------------------------------------------------> 0 0

Positions --------------------------------------------------------------------------------------> (1) (2)

Command Number 222:

Zone No. Assign. to Input No. 3 of Expander Module No. 1

Default values -------------------------------------------------------------------------------> 0 0
2

Positions --------------------------------------------------------------------------------------> (1) (2)

Command Number 223:

Zone No. Assign. to Input No. 4 of Expander Module No. 1

Default values ------------------------------------------------------------------------------> 0 0
2

Positions ------------------------------------------------------------------------------------> (1) (2)

Command Number 224:

Zone No. Assign. to Input No. 5 of Expander Module No. 1

Default values ------------------------------------------------------------------------------> 0 0

Positions -------------------------------------------------------------------------------------> (1) (2)

Command Number 225:

Zone No. Assign. to Input No. 6 of Expander Module No. 1

Default values ------------------------------------------------------------------------------> 0 0
2

Positions -----------------------------------------------------------------------------------> (1) (2)

Command Number 226:

Zone No. Assignment to Input No. 7 of Expander Module

No. 1

Default values -------------------------------------------------------------------------------> 0 0
2

Positions --------------------------------------------------------------------------------------> (1) (2)

Command Number 227:

Zone No. Assignment to Input No. 8 of Expander Module

No. 1

Default values -----------------------------------------------------------------------------> 0 0
2

Positions -------------------------------------------------------------------------------------> (1) (2)

Command Number 228:

Zone No. Assignment to Input No. 1 of Ex- pansor Module

No. 2

Default values ----------------------------------------------------------------------------> 0 0

Positions -------------------------------------------------------------------------------------> (1) (2)

Digit position (1)-(2):

Zone No. assignment to Input No. 1 of Expander Module No. 2

The code must be 2 digits long. Valid values are 00 to 32. With the value [00] the zone

is bypassed.

Note:

Commands 229 to 235 (Zone No. Assignment to entry No. 1 of the

expander module No. 2) are programmed in the same way as command No. 228.

Command Number 229:

Zone No. Assignment to Input No. 2 of Expander Module No. 2

Default values -----------------------------------------------------------------------------> 0 0
2

Positions --------------------------------------------------------------------------------------> (1) (2)

Command Number 230:

Zone No. Assign. to Input No. 3 of Expander Module No. 2

Default values

--------------------------------------------------------------> 0

Posiciones ------------------------------------------------------------------------------------> (1) (2)

Command Number 231:

Zone No.Assignment to Input No.4 of Expander Module No

Default values ------------------------------------------------------------> 0

Positions -------------------------------------------------------------------------------------> (1) (2)

Содержание PC-900G









































Результаты поиска

Содержание PC-900G

Отзывы:

Бренды по названию

Популярные бренды

Garnet PC-900G, Быстрое руководство по программированию

Результаты поиска

Содержание PC-900G

Отзывы:

Бренды по названию

Популярные бренды