16
SECTION 10: Programming parameters
Command Number 001:
Master User Code ( User No. 32 )
Default values ---------------------------->
1
2
3
4
0 0 1
Positions ------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Master User Code
The code must be 4 digits long. Valid values are 0-9. If you program the values
[0000] the code will be overridden.
Command Number 003:
Installer Code
Default values --------------------------->
5
5
5
5
0 0 3
Positions
------------------------------------------------>
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Installer Code
The code must have 4 digits. Valid values are 0-9
Command Number 004:
Duress Code (Partition No. 1)
Default values ---------------------------->
0
0
0
0
0
0
4
Positions
------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Duress Code
The code must be 4 digits long. Valid values are 0-9
Command Number 005:
Duress Code (Partition No. 2)
Default values ---------------------------->
0
0
0
0
0 0 5
Positions
------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Duress Code
The code must be 4 digits long. Valid values are 0-9
Command Number 006:
Duress Code (Partition No. 3)
Default values ---------------------------->
0
0
0
0
0 0 6
Positions
------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Duress Code
The code must be 4 digits long. Valid values are 0-9
Command Number 007:
Duress Code (Partition No. 4)
Default values ---------------------------->
0
0
0
0
0 0 7
Positions
------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Duress Code
The code must be 4 digits long. Valid values are 0-9
Command Number 012:
Duress Code for Access Control.
Default values ---------------------------->
0
0
0
0
0 1 2
Positions
------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Duress Code
The code must be 4 digits long. Valid values are 0-9
Command Number 017:
Wired Programming Code (PC Link)
Default values
---------------------------->
1
1
1
1
0 1 7
Positions
------------------------------------------------->
(1)
(2)
(3)
(4)
Digit positions (1) - (4):
Programming Code (PC Link)
The code must be 4 digits long. Valid values are 0-9
Command Number 025:
User Code Attributes Nº1
Default values -----------------------> 1 0 0 0 1 1 1 0
0 2 5
Positions
---------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Positions of digit (1)
: Partitions Assignment No 1
0 = No Control Partition No. 1
1 = Controls Partition No. 1
Digit position (2):
Partition Allocation No. 2
0 = No Control Partition No. 2
1 = Controls Partition No. 2
Digit position (3):
Partition Assignment No. 3
0 = No Control Partition No. 3
1 = Controls Partition No. 3
Digit position (4):
Partition Allocation No. 4
0 = Does not control Partition N°4
1 = Controls Partition N°4
Digit position (5):
Enable Arming
0 = Arming Disabled
1 = Arming Enabled
Digit position (6):
Disarm Enabling
0 = Disarmed Disabled
1 = Disarmed Enabled
Digit position (7):
Enable Zone Bypass and Control PGMs
0 = Zone Bypass and PGM Control Disabled
1 = Zone Bypass and PGMs Control enabled
Digit position (8):
Programming of User Codes and Keypad Texts
0 = No Program User Codes
1 = User Codes Programme
Note:
Command Nos. 026 to 057 (User Code Functions) are programmed in the
same way as Command No. 025.
Command Number 026:
User Code No. 2 Attributes
Default values ----------------------> 1 0 0 0 1 1 1 0
0 2 6
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 027:
Attributes of User Code No. 3
Default values ----------------------> 1 0 0 0 1 1 1 0
0 2 7
Positions --------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 028:
User Code No. 4 Attributes
Default values
--------------------> 1 0 0 0 1 1 1 0
0
2 8
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 029:
User Code No. 5 Attributes
Default values ---------------------> 1 0 0 0 1 1 1 0
0
2 9
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 030:
User Code No. 6 Attributes
Default values ---------------------> 1 0 0 0 1 1 1 0
0
3 0
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 031:
User Code No. 7 Attributes
Default values ---------------------> 1 0 0 0 1 1 1 0
0
3 1
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 032:
User Code No. 8 Attributes
Default values ---------------------> 1 0 0 0 1 1 1 0
0
3 2
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 033:
User Code No. 9 Attributes
Default values ---------------------> 1 0 0 0 1 1 1 0
0
3 3
Positions ---------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 034:
User Code No. 10 Attributes
Default values ---------------------> 1 0 0 0 1 1 1 0
0
3 4
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Command Number 035:
User Code No. 11 Attributes
Default values ---------------------> 1 0 0 0 1 1 1 0
0
3 5
Positions ----------------------------> (1) (2) (3) (4) (5) (6) (7) (8)
Содержание PC-900G
