background image

provides an underwater view of the sea floor or lake 
bottom.
Suspended targets, such as fish, are indicated by red, 
green, and yellow spheres. Red indicates the largest 
targets and green indicates the smallest.

Viewing Tide Station Information

 WARNING

Tide and current information is for information purposes 
only. It is your responsibility to heed all posted water-
related guidance, to remain aware of your surroundings, 
and to use safe judgment in, on, and around the water at 
all times. Failure to heed this warning could result in 
property damage, serious personal injury, or death.

The 

 icon on the chart indicates a tide station. You can 

view a detailed graph for a tide station to help predict the 
tide level at different times or on different days.

NOTE: 

This feature is available with premium charts, in 

some areas.

1

From the Navigation chart or Fishing chart, select a 
tide station.
Tide direction and tide level information appear near 

.

2

Select the station name.

Animated Tide and Current Indicators

 WARNING

Tide and current information is for information purposes 
only. It is your responsibility to heed all posted water-
related guidance, to remain aware of your surroundings, 
and to use safe judgment in, on, and around the water at 
all times. Failure to heed this warning could result in 
property damage, serious personal injury, or death.

NOTE: 

This feature is available with premium charts, in 

some areas.
You can view indicators for animated tide station and 
current direction on the Navigation chart or the Fishing 
chart. You must also enable animated icons in the chart 
settings (

Showing Tides and Current Indicators

page 13

).

An indicator for a tide station appears on the chart as a 
vertical bar graph with an arrow. A red arrow pointing 
downward indicates a falling tide, and a blue arrow 
pointing upward indicates a rising tide. When you move 
the cursor over the tide station indicator, the height of the 
tide at the station appears above the station indicator.
Current direction indicators appear as arrows on the 
chart. The direction of each arrow indicates the direction 

of the current at a specific location on the chart. The color 
of the current arrow indicates the range of speed for the 
current at that location. When you move the cursor over 
the current direction indicator, the specific current speed 
at the location appears above the direction indicator.

Color

Current Speed Range

Yellow

0 to 1 knot

Orange

1 to 2 knots

Red

2 or more knots

Showing Tides and Current Indicators
NOTE: 

This feature is available with premium charts, in 

some areas.
You can show static or animated tide and current station 
indicators on the Navigation chart or Fishing chart.

1

From the Navigation or Fishing chart, select 

Menu

 > 

Layers

 > 

Chart

 > 

Tides & Currents

.

2

Select an option:
• To show animated tide station indicators and 

animated current direction indicators on the chart, 
select 

Animated

.

• To enables the tides and current slider, which sets 

the time for which tides and currents are reported 
on the map, select 

Slider

.

Showing Satellite Imagery on the Navigation Chart
NOTE: 

This feature is available with premium charts, in 

some areas.
You can overlay high-resolution satellite images on the 
land or on both land and sea portions of the Navigation 
chart.

NOTE: 

When enabled, high-resolution satellite images 

are present only at lower zoom levels. If you cannot see 
high-resolution images in your optional chart region, you 
can select 

 to zoom in. You also can set the detail level 

higher by changing the map zoom detail.

1

From the Navigation chart, select 

Menu

 > 

Layers

 > 

Chart

 > 

Satellite Photos

.

2

Select an option:
• Select 

Land Only

 to show standard chart 

information on the water, with photos overlaying the 
land.

NOTE: 

This setting must be enabled to view 

Standard Mapping

®

 charts.

• Select 

Photo Map

 to show photos on both the 

water and the land at a specified opacity. Use the 
slider bar to adjust the photo opacity. The higher 
you set the percentage, the more the satellite 
photos cover both land and water.

Viewing Aerial Photos of Landmarks

Before you can view aerial photos on the Navigation 
chart, you must turn on the Photo Points setting in the 
chart setup (

Chart Layers

, page 16

).

Charts and 3D Chart Views

13

Содержание Volvo Penta Glass Cockpit B12











































































































Отзывы: