![background image](http://html.mh-extra.com/html/garmin/volvo-penta-glass-cockpit-b12/volvo-penta-glass-cockpit-b12_owners-manual_565783063.webp)
Chart Display
: Shows the chart under the radar image.
When enabled, the Layers menu appears.
Orientation
: Sets the perspective of the radar display.
Crosstalk Rej.
: Reduces the appearance of clutter
caused by interference from another nearby radar
source.
Rotation Spd.
: Sets the preferred speed at which the
radar rotates. The High Speed option can be used to
increase the refresh rate. In some situations, the radar
automatically rotates at the normal speed to improve
detection, for example, when a longer range is selected
or when MotionScope or Dual range is used.
Appearance
: Sets the color scheme, look-ahead speed,
and navigation appearance.
Installation
: Allows you to configure the radar for the
installation, such as setting the front of the boat and the
antenna park position.
Reducing Cross Talk Clutter on the Radar Screen
You can reduce the appearance of clutter caused by
interference from another nearby radar source, when the
cross talk reject setting is on.
NOTE:
Depending upon the radar in use, the cross talk
reject setting configured for use in one radar mode may or
may not be applied to other radar modes or to the Radar
overlay.
From a Radar screen or the Radar overlay, select
Menu
>
Radar Setup
>
Crosstalk Rej.
.
Radar Appearance Settings
From a radar screen, select
Menu
>
Radar Setup
>
Appearance
.
NOTE:
These settings do not apply to the radar overlay.
Bkgd. Color
: Sets the color for the background.
Frgd. Color
: Sets the color scheme for the radar returns.
Brightness
: Sets the brightness of various radar features,
such as range rings and tracking symbols.
Look-Ahead Speed
: Shifts your present location toward
the bottom of the screen automatically as your speed
increases. Enter your top speed for the best results.
Radar Installation Settings
Front of Boat
: Compensates for the physical location of
the radar when it is not on the boat axis (
).
Antenna Configuration
: Sets the radar antenna size and
sets the position in which the radar stops (
).
No Transmit Zone
: Sets the area in which the radar does
not transmit signals (
Enabling and Adjusting a Radar
).
Front-of-Boat Offset
The front-of-boat offset compensates for the physical
location of the radar scanner on a boat, if the radar
scanner does not align with the bow-stern axis.
Measuring the Potential Front-of-Boat Offset
The front-of-boat offset compensates for the physical
location of the radar scanner on a boat, if the radar
scanner does not align with the bow-stern axis.
1
Using a magnetic compass, take an optical bearing of
a stationary target located within viewable range.
2
Measure the target bearing on the radar.
3
If the bearing deviation is more than +/- 1°, set the
front-of-boat offset.
Setting the Front-of-Boat Offset
Before you can set the front-of-boat offset, you must
measure the potential front-of-boat offset.
The front-of-boat offset setting configured for use in one
radar mode is applied to every other radar mode and to
the Radar overlay.
1
From a Radar screen or the Radar overlay, select
Menu
>
Radar Setup
>
Installation
>
Front of Boat
.
2
Select
Up
or
Down
to adjust the offset.
Setting a Custom Park Position
By default, the antenna is stopped perpendicular to the
pedestal when it is not spinning. You can adjust this
position.
1
From the radar screen, select
Menu
>
Radar Setup
>
Installation
>
Antenna Configuration
>
Park
Position
.
2
Use the slider bar to adjust the position of the antenna
when stopped, and select
Back
.
Radar My Vessel Layer Settings
From a radar screen, select
Menu
>
Layers
>
My Vessel
.
Heading Line
: Shows an extension from the bow of the
boat in the direction of travel on the radar screen.
Range Rings
: Shows the range rings that help you to
visualize distances on the radar screen.
Bearing Ring
: Shows a bearing relative to your heading
or based on a north reference, to help you determine
the bearing to an object shown on the radar screen.
Selecting a Different Radar Source
1
Select an option:
• From a radar screen or the radar overlay, select
Menu
>
Radar Setup
>
Source
.
• Select
Settings
>
Communications
>
Preferred
Sources
>
Radar
.
2
Select the radar source.
Changing the Radar Mode
1
From a combination screen or SmartMode layout with
radar, select
Menu
>
Radar Menu
>
Change Radar
.
2
Select a radar mode.
Radar
51
Содержание Volvo Penta Glass Cockpit B12
Страница 1: ...Owners manual VOLVO PENTA Glass Cockpit ...
Страница 12: ......
Страница 106: ...AB Volvo Penta SE 405 08 Göteborg Sweden September 2021 Printed in Taiwan 190 02784 00_0C ...