manualshive.com logo in svg

Garmin Volvo Penta Glass Cockpit B12, Руководство пользователя

Полная инструкция по эксплуатации Garmin Volvo Penta Glass Cockpit B12 доступна для скачивания бесплатно на manualshive.com. Владельцы смогут ознакомиться с руководством, чтобы настроить и использовать функционал устройства наиболее эффективно. Необходимое "Owner's Manual" или другая полезная информация доступны для загрузки.

Поделиться
Скачать
background image

Symbol Meaning

Virtual ATON: Topmark West

Virtual ATON: Topmark Special

Virtual ATON: Topmark Safe

Virtual ATON: Topmark Danger

AIS Distress Signals

Self-contained AIS distress signal devices transmit 
emergency position reports when activated. The 
chartplotter can receive signals from Search and Rescue 
Transmitters (SART), Emergency Position Indicating 
Radio Beacons (EPIRB), and other man overboard 
signals. Distress signal transmissions are different than 
standard AIS transmissions, so they appear differently on 
the chartplotter. Instead of tracking a distress signal 
transmission for collision avoidance, you track a distress 
signal transmission to locate and assist a vessel or 
person.

Navigating to a Distress Signal Transmission

When you receive a distress signal transmission, a 
distress signal alarm appears.

Select 

Review

 > 

Go To

 to begin navigation to the 

transmission.

AIS Distress Signal Device Targeting Symbols

Symbol Description

AIS distress signal device transmission. Select 
to see more information about the transmission 
and begin navigation.

Transmission lost.

Transmission test. Appears when a vessel 
initiates a test of their distress signal device, 
and does not represent a true emergency.

Transmission test lost.

Enabling AIS Transmission Test Alerts

To avoid a large number of test alerts and symbols in 
crowded areas such as marinas, you can select to receive 
or ignore AIS test messages. To test an AIS emergency 

device, you must enable the chartplotter to receive test 
alerts.

1

Select 

Settings

 > 

Alarms

 > 

AIS

.

2

Select an option:
• To receive or ignore Emergency Position Indicating 

Radio Beacon (EPRIB) test signals, select 

AIS-

EPIRB Test

.

• To receive or ignore Man Overboard (MOB) test 

signals, select 

AIS-MOB Test

.

• To receive or ignore Search and Rescue 

Transponder (SART) test signals, select 

AIS-SART 

Test

.

Turning Off AIS Reception

AIS signal reception is turned on by default.

Select 

Settings

 > 

Other Vessels

 > 

AIS

 > 

Off

.

All AIS functionality on all charts and 3D chart views is 
disabled. This includes AIS vessel targeting and 
tracking, collision alarms that result from AIS vessel 
targeting and tracking, and the display of information 
about AIS vessels.

Chart Menu

NOTE: 

Not all settings apply to all charts. Some options 

require premium maps or connected accessories, such as 
radar.

NOTE: 

The menus may contain some settings that are 

not supported by your installed charts or your present 
location. If you make changes to those settings, the 
changes will not impact the chart view.
From a chart, select Menu.

Layers

: Adjusts the appearance of the different items on 

the charts (

Chart Layers

, page 16

).

Quickdraw Contours

: Turns on bottom contour drawing, 

and allows you to create fishing map labels (

Garmin 

Quickdraw Contours Mapping

, page 19

).

Settings

: Adjusts the chart settings (

Chart Settings

, 

page 19

).

Edit Overlays

: Adjusts the data shown on the screen 

(

Customizing the Data Overlays

, page 5

).

Chart Layers

You can turn on and off chart layers and customize 
features of the charts. Each setting is specific to the chart 
or chart view being used.

NOTE: 

Not all settings apply to all charts and chartplotter 

models. Some options require premium maps or 
connected accessories.

NOTE: 

The menus may contain some settings that are 

not supported by your installed charts or your present 
location. If you make changes to those settings, the 
changes will not impact the chart view.
From a chart, select 

Menu

 > 

Layers

.

Chart

: Shows and hides chart-related items (

Chart Layer 

Settings

, page 17

).

16

Charts and 3D Chart Views

Содержание Volvo Penta Glass Cockpit B12











































































































Отзывы:

Нет отзывов

Похожие инструкции для Volvo Penta Glass Cockpit B12

Datavideo RMC-230 Instruction Manual preview
RMC-230
Бренд: Datavideo Страницы: 17
Datamax I-Class Installation And Operating Instructions Manual preview
I-Class
Бренд: Datamax Страницы: 22
cinetto PS40.3 Assembly Instructions Manual preview
PS40.3
Бренд: cinetto Страницы: 56
DSE DSE 6120 Installation Instructions preview
DSE 6120
Бренд: DSE Страницы: 2
Grundfos IO 401 Installation And Operating Instructions Manual preview
IO 401
Бренд: Grundfos Страницы: 20
Wenglor SR4B3B01S Operating Instructions Manual preview
SR4B3B01S
Бренд: Wenglor Страницы: 44
Valence Tech iBT-07 Manual preview
iBT-07
Бренд: Valence Tech Страницы: 12
Dungs 273061 Instructions Manual preview
273061
Бренд: Dungs Страницы: 56
Emec PH CONTROLLER Operating Manual preview
PH CONTROLLER
Бренд: Emec Страницы: 8
Pangolin FB4 Series User Manual preview
FB4 Series
Бренд: Pangolin Страницы: 35
D+H RZN 43 Series Original Instructions preview
RZN 43 Series
Бренд: D+H Страницы: 2
GRAUPNER MC-22S Programming Manual preview
MC-22S
Бренд: GRAUPNER Страницы: 180
DCU Tecnologic 30902020 Quick Start Manual preview
30902020
Бренд: DCU Tecnologic Страницы: 2
Ultraflex B 301 Installation And Maintenance Manual preview
B 301
Бренд: Ultraflex Страницы: 48
Eclipse TRILOGY T500 Series Instruction Manual preview
TRILOGY T500 Series
Бренд: Eclipse Страницы: 20
Window Master MotorController WCC 310 UL Installation Instructions Manual preview
MotorController WCC 310 UL
Бренд: Window Master Страницы: 39
Trane Zone Panel Installation Manual preview
Zone Panel
Бренд: Trane Страницы: 28
ARMTEL ACM-IP2 User Manual preview
ACM-IP2
Бренд: ARMTEL Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды