My Vessel
: Shows and hides items relating to the boat
).
User Data
: Shows and hides user data, such as
waypoints, boundaries, and tracks, and opens user
data lists (
).
Other Vessels
: Adjusts how other vessels are shown
).
Water
: Shows and hides depth items (
).
Quickdraw Contours
: Shows and hides Garmin
Quickdraw Contours data (
).
Weather
: Shows and hides weather-related items
).
Chart Layer Settings
From a chart, select
Menu
>
Layers
>
Chart
.
Satellite Photos
: Shows high-resolution satellite images
on the land or on both land and sea portions of the
Navigation chart, when certain premium maps are used
(
Showing Satellite Imagery on the Navigation Chart
).
NOTE:
This setting must be enabled to view Standard
Mapping charts.
Tides & Currents
: Shows current station indicators and
tide station indicators on the chart (
) and enables the tides and
current slider, which sets the time for which tides and
currents are reported on the map.
Land POIs
: Shows points of interest on land.
Navaid
: Shows navigational aids, such as ATONs and
flashing lights, on the chart. Allows you to select NOAA
or IALA navaid type.
Service Points
: Shows locations for marine services.
Depth
: Adjusts the items on the depth layer (
).
Restricted Areas
: Shows information about restricted
areas on the chart.
Photo Points
: Shows camera icons for aerial photos
Viewing Aerial Photos of Landmarks
).
Depth Layer Settings
From a chart, select
Menu
>
Layers
>
Chart
>
Depth
.
Depth Shading
: Specifies an upper and lower depth to
shade between.
Shallow Shading
: Sets the shades from the shoreline to
the specified depth.
Spot Depths
: Turns on spot soundings and sets a
dangerous depth. Spot depths that are equal to or
more shallow than the dangerous depth are indicated
by red text.
Fishing Contours
: Sets the zoom level for a detailed
view of bottom contours and depth soundings and
simplifies map presentation for optimal use while
fishing.
My Vessel Layer Settings
From a chart, select
Menu
>
Layers
>
My Vessel
.
Heading Line
: Shows and adjusts the heading line, which
is a line drawn on the map from the bow of the boat in
the direction of travel (
).
Active Tracks
: Shows the active track on the chart and
opens the Active Track Options menu.
Wind Rose
: Shows a visual representation of the wind
angle or direction provided by the connected wind
sensor and sets the wind source.
Compass Rose
: Shows a compass rose around your
boat, indicating compass direction oriented to the
heading of the boat. Enabling this option disables the
Wind Rose option.
Vessel Icon
: Sets the icon that represents your present
location on the chart.
Laylines Settings
To use the laylines features, you must connect a wind
sensor to the chartplotter.
When in sailing mode (
),
you can display laylines on the navigation chart. Laylines
can be very helpful when racing.
From the Navigation chart, select
Menu
>
Layers
>
My
Vessel
>
Laylines
>
Setup
.
Sailing Ang.
: Allows you to select how the device
calculates laylines. The Actual option calculates the
laylines using the measured wind angle from the wind
sensor. The Manual option calculates the laylines using
manually entered windward and leeward angles. The
Polar Table option calculates the laylines based on the
imported polar table data (
).
Windward Ang.
: Allows you to set a layline based on the
windward sailing angle.
Leeward Ang.
: Allows you to set a layline based on the
leeward sailing angle.
Tide Correction
: Corrects the laylines based on the tide.
Layline Filter
: Filters the layline data based on the time
interval entered. For a smoother layline that filters out
some of the changes in the boat's heading or true wind
angle, enter a higher number. For laylines that display
a higher sensitivity to changes in the boat's heading or
true wind angle, enter a lower number.
Charts and 3D Chart Views
17
Содержание Volvo Penta Glass Cockpit B12
Страница 1: ...Owners manual VOLVO PENTA Glass Cockpit ...
Страница 12: ......
Страница 106: ...AB Volvo Penta SE 405 08 Göteborg Sweden September 2021 Printed in Taiwan 190 02784 00_0C ...
