Garmin GPSMAP GPSMAP 196, Руководство и справочник пилота

Страница: 61 / 124

51
NRST/FIND
From the nearest airport list, an options window allows you to fi lter out airports that don’t meet a
defi ned criteria. This allows you to weed out airports with an undesired surface type and/or insuffi cient
runway length. Pilots of larger, high-performance aircraft may defi ne the nearest airport search to ignore
airports at which it would be diffi cult, if not impossible, to land.
The following runway surface settings are available:
• Any— displays any runway, regardless of surface type, including water landing facilities.
• Hard Only— displays only runways with a concrete, asphalt or similar sealed surface.
• Hard or Soft— displays all runways except water landing facilities.
• Water Only— display only water landing facilities.
To select the nearest airport criteria:
1. Display the nearest airports list by following the steps on the preceding page.
2. Press MENU to display an options window, then press ENTER . A pop-up window will appear with
the current settings for runway surface and minimum runway length.
3. With the runway surface fi eld highlighted, press ENTER . Use the ARROW KEYPAD to select the
desired surface type and press ENTER .
4. Highlight the minimum runway length fi eld and press ENTER . Use the ARROW KEYPAD to select
the minimum acceptable runway length and press ENTER once all numbers have been entered.
Use caution when changing the nearest airport criteria. In an emergency, a short runway
is still typically preferable to an off-fi eld landing. If you set the runway length too high or
exclude many runway surfaces, you may not be alerted to a nearby airport that otherwise
would be listed.
Nearest Airport Criteria
)
Press MENU to display the ‘Set Airport Criteria’ option.
You can change the nearest airport criteria to eliminate airports at
which it would be diffi cult or impossible for you to land.
190-00283-00Backup.indd 51 12/8/2002, 8:09:17 PM