Using Simulator Mode
Simulator Mode is great for practicing with the unit if you are
indoors or when satellite signals are not available. All waypoints and
routes created in Simulator Mode are retained in memory for future
use.
By unplugging the GXM 30 antenna and placing the unit in
Simulator Mode, you can view simulated weather information.
NOTE:
Do not try to navigate using Simulator Mode. When the
unit is set to Simulator Mode, the GPS receiver is turned off.
Any satellite signal strength bars shown are only simulations and
do not represent the strength of actual satellite signals.
To turn on Simulator Mode:
1. Highlight the
GPS
tab on the Main Menu.
2. Press
MENU
to open the GPS tab options menu.
3. Highlight
Start Simulator
, and press
ENTER
.
Entering a New Location
Use the GPS options menu to enter a new location from which to
simulate.
To enter a new location using the map:
GPS tab
Starting Simulator Mode from the GPS tab
1. Highlight the
GPS
tab on the Main Menu.
2. Press
MENU
to open the options menu
.
3. Highlight
New Location
,
and press
ENTER
.
4. Highlight
Use Map
,
and press
ENTER
.
5. Use the
ROCKER
to move the panning arrow to the location
you want on the map, and press
ENTER
.
12
GPSMAP 376C Owner’s Manual
G
ETTING
S
TARTED
>
U
SING
S
IMULATOR
M
ODE
190-00508-00_0C.indd 12
11/6/2006 9:47:26 AM
Содержание GPSMAP 376C
Страница 151: ...190 00508 00_0C indd 3 11 6 2006 9 47 51 AM...