Advanced NMEA Output Setup
If you are going to interface the GPSMAP 376C with another
piece of equipment (such as a radar or autopilot), the unit needs
to be set to output NMEA data. The NMEA data transmission can
be customized to keep the output rate at two seconds. If too many
NMEA sentences are activated, the unit might take longer than two
seconds to update.
You can also set the Output Rate to Fast to output a minimum
number of NMEA sentences at 1-second intervals.
To access the Advanced NMEA Output Setup:
1. Highlight the
Setup
tab on the Main Menu.
2. Select the
Interface
sub tab.
3. Highlight the
Serial Data Format
field, and press
ENTER
.
4. Select
NMEA In/NMEA Out
, and press
ENTER
.
5. Press
MENU
to open the options menu. Select
Advanced
NMEA Setup
,
and press
ENTER
.
Advanced NMEA Output Setup
Use the Advanced NMEA Output Setup Page to set the output rate,
change the precision of the Lat/Lon minutes, set Waypoint IDs to
names or numbers, and turn on and off the GPS status, the GARMIN
proprietary sentences, and Waypoint/Route (WPL, RTE).
GPSMAP 376C NMEA Sentence Output (NMEA version 3.01
compliant):
• Always transmitted: GPRMC, GPGGA, GPGLL, GPBWC,
GPVTG, GPXTE, GPRMB
• Switchable sentences: GPGSA, GPGSV, GPWPL, GPRTE
• GARMIN proprietary: PGRME, PGRMZ, PGRMM
94
GPSMAP 376C Owner’s Manual
M
AIN
M
ENU
>
S
ETUP
T
AB
190-00508-00_0C.indd 94
11/6/2006 9:47:40 AM
Содержание GPSMAP 376C
Страница 151: ...190 00508 00_0C indd 3 11 6 2006 9 47 51 AM...