Garmin GPS 92 Скачать руководство пользователя | Manualshive

Страница: 54 / 84

background image

Navigation Page

The navigation page displays the bearing (BRG) and

distance (DST) to the destination at the top of the page,
along with your present speed (SPD) and ground track
(TRK). The GOTO destination (or “active to” waypoint in
the case of a route) is displayed on the middle of the page,
above the course deviation indicator (CDI).

The CDI consists of a course deviation scale across

the center of the page and a moving D-bar (course devi-
ation bar). If you move off course, the D-bar will indicate
how far off course you are, based upon its placement
along the course deviation scale. To get back on course
and center the D-bar, simply steer toward the D-bar. The
CDI scale is adjustable for 0.25, 1.25 or 5.0 (nautical
mile/statute mile/kilometer). The default setting is 1.25,
which represents the distance from the center of the CDI
to full left or right limits. (See page 51 for more informa-
tion on CDI scale settings.)

A relative bearing pointer—which remains fixed at

the center of the CDI scale—points in the direction of
your destination, relative to your current ground track.
For instance, if the arrow points up you are heading
directly to your destination. If the arrow points any other
direction, turn toward the arrow until it “swings” around
and points up. Then continue in that direction to reach
your destination.

At the bottom of the page appears your estimated

time enroute (ETE), cross track error (XTK) and current
time (local or GMT, see page 52). The vertical navigation
(VNAV) field is user-definable and may be used to guide
you through climbs or descents to a specified target alti-
tude (see page 64).

If the relative bearing point-
er points any direction
other than straight up, turn
toward the arrow until it
swings around and points
up. Then continue in that
direction to reach your
destination.

Navigation

Page

Reference

48

Estimated

Time Enroute

Bearing to

Waypoint

Ground

Track

Relative Bearing

Pointer

Distance to

Waypoint

Ground

Speed

CDI Scale

Crosstrack Error

VNAV Altitude

Field

Current Time

If the GPS 92 is not navi-
gating to a destination way-
point, the navigation page
will only display your speed
and track over ground.

92 manual 4/15/98 3:48 PM Page 48

«
...
52
53
54
55
56
...
»

Содержание GPS 92





















































































Отзывы:

Нет отзывов

Похожие инструкции для GPS 92

GeoChaser Control

Бренд: 12trace Страницы: 8

Бренд: Garmin Страницы: 2

Бренд: Garmin Страницы: 70

GPSMAP 4000 Series

Бренд: Garmin Страницы: 24

nuvi 200 Series

Бренд: Garmin Страницы: 1

RoadMate 760 - Automotive GPS Receiver

Бренд: Magellan Страницы: 130

Бренд: Magellan Страницы: 15

nuvi 3500 series

Бренд: Garmin Страницы: 88

Бренд: MICODUS Страницы: 12

Triton Triton 300

Бренд: Magellan Страницы: 56

Бренд: Jensen Страницы: 89

AT PLUS_CDMA(3G)

Бренд: Prime Страницы: 8

6.5 inch Wide TFT LCD Monitor AVN 721

Бренд: Farenheit Страницы: 78

Бренд: Fujitsu Страницы: 206

Pocket LOOX N100 Series

Бренд: Fujitsu Страницы: 2

Бренд: Royal Страницы: 2

Бренд: SRT Страницы: 2

Бренд: G Sat Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды