The delete and rename prompts, located near the bot-
tom of the user waypoint page, allow you to quickly
remove a waypoint from memory or change the name of
an existing waypoint.
To delete the currently selected user waypoint:
1. Highlight ‘DELETE?’ and press
E
.
2. Highlight ‘YES?’ and press
E
to confirm.
The user waypoint page also allows you to rename
any user waypoint in memory.
To rename the currently selected user waypoint:
1. Highlight ‘RENAME?’ and press
E
. The rename way-
point page will appear.
2. Enter the new waypoint name and press
E
. The
highlight will advance to the ‘Yes?’ prompt.
3. Press
E
to accept the name, or
Q
to cancel.
Creating Waypoints with AutoStore
The
M
key is also used to save new waypoints using
AutoStore. AutoStore allows you to quickly store your
present position and add the new waypoint to a selected
route if desired.
To save your present position using AutoStore:
1. Press
M
twice to capture your position (if you’re
already on a waypoint page, you’ll only need to press
the
M
key once).
The AutoStore page will appear, showing the cap-
tured position and a default 3-digit waypoint name. To
change the default position name :
2. Highlight the name field and enter the name.
3. Press
E
. The highlight will move to the ‘route’ field.
If you’d like to add the waypoint to a route:
1. Press
E
and enter the desired route number using
the arrow keypad and press
E
to confirm.
To save the AutoStore waypoint:
1. Highlight the ‘SAVE?’ field and press
E
.
Entering a distance from a
reference waypoint.
AutoStore Page
User Waypoints
& AutoStore
Reference
27
92 manual 4/15/98 3:48 PM Page 27
