Garmin GPS 92 Скачать руководство пользователя | Manualshive

Страница: 45 / 84

background image

Receiver Status

Receiver status is displayed at the top left of the

screen, with the current horizontal accuracy (estimated
position error, in feet or meters) at the top right. The sta-
tus field will show one of the following conditions:

Searching—

the receiver is looking for any available

satellites in view.

AutoLocate—

the receiver is initializing and collect-

ing new almanac data. This may take 3 to 5 minutes.

Acquiring—

the receiver is collecting data from avail-

able satellites but has not collected enough data to cal-
culate a 2D fix.

2D Navigation—

at least three satellites with good

geometry have been locked onto, and a 2-dimension-
al position fix (latitude and longitude) is being calcu-
lated. ‘2D Diff’ will appear when you are receiving
DGPS corrections in 2D mode.

3D Navigation—

at least four satellites with good

geometry have been locked onto and your position is
now being calculated in latitude, longitude and alti-
tude. ‘3D Diff’ will appear when you are receiving
DGPS corrections in 3D mode.

Poor GPS Coverage—

the receiver is no longer

tracking enough satellites for a 2D or 3D fix.

Not Usable—

the receiver is unusable, possibly due

to incorrect initialization or abnormal satellite condi-
tions. Turn the unit off and back on to reset.

Simulating Navigation—

the receiver is in simula-

tor mode.

EZinit Prompt

The satellite status page also displays the EZinit

prompt whenever a position fix has not been calculated
(the unit must be in searching, AutoLocate, acquiring, or
poor coverage mode).

This prompt allows you to manually reinitialize the

receiver. This feature is useful if you have traveled over
500 miles with the receiver off and you know it must be
initialized to your new position (the unit will also auto-
matically offer the EZinit prompt after 3-5 minutes of
unsuccessful satellite acquisition).

A poor coverage status will
appear if the receiver has
lost the number of satellites
required to compute a fix.

The EZinit prompt will
automatically appear if the
receiver needs to be initial-
ized. The prompt may also
appear during normal use if
the antenna is shaded or the
unit is used indoors.

Satellite Status

Page

Reference

39

92 manual 4/15/98 3:48 PM Page 39

«
...
43
44
45
46
47
...
»

Содержание GPS 92





















































































Отзывы:

Нет отзывов

Похожие инструкции для GPS 92

Бренд: Garmin Страницы: 78

Бренд: Teltronika Страницы: 17

Бренд: Teletype Страницы: 20

Бренд: Magellan Страницы: 88

eXplorist 400 - Wilderness Bundle

Бренд: Magellan Страницы: 108

Бренд: ALK Страницы: 56

Бренд: Prestigio Страницы: 24

Бренд: Rosen Страницы: 16

Бренд: Garmin Страницы: 115

Бренд: CanMore Страницы: 7

Navigation Software

Бренд: ZENEC Страницы: 2

M-Tracer MT500G

Бренд: Epson Страницы: 2

Бренд: UniGuard Страницы: 6

Бренд: Garmin Страницы: 16

NAV-TRACKER 2.00

Бренд: Paradox Marine Страницы: 13

Бренд: THOMSON Страницы: 109

Traffic Assist 7927

Бренд: Becker Страницы: 2

Бренд: II Morrow Inc. Страницы: 367

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды