Clearing a Route
The route action fields, located near the bottom of the
route definition page, allow you to clear, invert and acti-
vate the routes stored in the GPS 92.
To clear a route:
1. Highlight the route number field at the top of the page,
press
E
, select the desired route number and press
E
again.
2. Highlight the ‘CLR?’ field and press
E
.
A warning page will appear, asking you to confirm
that you want to remove all waypoints from the route.
3. Highlight the ‘Yes’ field with the left arrow key and press
E
.
4. Press
P
to return to the main menu page.
Activating or Inverting a Route
After a route has been entered in the GPS 92, it can
be activated in its sequence or inverted (in reverse order).
The process of activating or inverting a stored route takes
a storage route (routes 1-19) and copies it into the active
route (route 0) for navigation.
This system allows you to have an active route that
you may edit during navigation and save as an entirely
new route from the original. You will have to copy the
active route to an unused storage route to save it, since
new route or TracBack activation overwrites route 0.
To activate a route:
1. Select the route definition page and press
E
to
activate the route number field.
2. Select the route number to be activated and press
E
.
3. Highlight the ‘ACT?’ field and press
E
.
Inverting a route allows you to navigate route legs in
reverse order without editing the original route.
To activate a route in inverted order:
1. Follow the same steps as above, but select the ‘'INV'?’
field and press
E
.
To activate a route, high-
light the ‘ACT?’ prompt and
press ENTER.
To confirm clearing (delet-
ing) a route, highlight the
‘Yes?’ prompt and press
ENTER.
Clearing &
Activating
Routes
Reference
35
92 manual 4/15/98 3:48 PM Page 35
