GNS 430 Pilot’s Guide and Reference
4-4
SECTION 4
DIRECT-TO NAVIGATION
Shortcuts
Shortcuts are available when using the
Direct-to
Key,
allowing the pilot to bypass the use of the small and large
right
knobs to enter the destination waypoint’s identifier.
A direct-to can be performed from any page displaying
a single waypoint identifier (such as the WPT pages for
airports and NAVAIDS, see Figure 4-9) by simply pressing
the
Direct-to
Key and the
ENT
Key. For pages that display
a list of waypoints (e.g., the Nearest Airport Page, see
Figure 4-10), the desired waypoint must be highlighted
with the cursor before pressing the
Direct-to
Key.
Figure 4-9 Single Waypoint Displayed
Figure 4-10 Nearest List
To select an on-screen waypoint as a direct-
to destination:
1) If a single airport, NAVAID, or user waypoint is
displayed on-screen: press the
Direct-to
Key,
then press the
ENT
Key twice.
2) If a list of waypoints is displayed on-screen:
press the small
right
knob to activate the
cursor.
3) Turn the large
right
knob to highlight the
desired waypoint.
4) Press the
Direct-to Key
followed by the
ENT
Key twice.
Содержание GNS 430
