Garmin GNS 430, Руководство и справочник пилота

Страница: 184 / 234

GNS 430 Pilot’s Guide and Reference 10-26
SECTION 10
AUX PAGES
To change the map datum:
1) Select ‘Position Format/Map Datum’ from the
Setup 1 Page, using the steps described at the
beginning of this section.
2) Turn the large
right
knob to highlight the map
datum field (Figure 10-66).
Figure 10-66 Map Datum Field Highlighted
3) Turn the small
right
knob to display a window
showing the available map datums.
4) Continue turning the small right knob to select
the desired map datum. (Appendix C for a list
of available map datums.)
5) Press the
ENT
Key to accept the selected
datum.
NOTE: Per TSO C129a, the WGS-84 map datum
should be used in the United States. For use
outside the U.S., select the geodetic datum
required by that country. See complete listing
of map datums in Appendix C.
Setup 1 Page: Date/Time
To display local time or UTC:
1) Select ‘Date/Time’ from the Setup 1 Page, using
the steps described at the beginning of this
section.
2) The flashing cursor highlights the time format
field (Figure 10-67). Turn the small right knob
to display a window of available time formats:
Local 12hr, Local 24hr, or UTC.
Figure 10-67 Time Format Window
3) Continue turning the small right knob to select
the desired time format.
4) Press the
ENT
Key to accept the selection.
To set the local time:
1) Select ‘Date/Time’ from the Setup 1 Page, using
the steps described at the beginning of this
section.
2) Turn the large right knob to highlight the time
offset field (Figure 10-68).
Figure 10-68 Time Offset Field Highlighted