manualshive.com logo in svg

Garmin GNS 430, Руководство и справочник пилота

Garmin GNS 430 - высокотехнологичное навигационное устройство с детальной спецификацией и мануалом. Бесплатно скачайте инструкцию на manualshive.com. Легкость использования и точные карты делают его отличным выбором для авиации.

Поделиться
Скачать
background image

GNS 430 Pilot’s Guide and Reference

SECTION 13 – MESSAGES, 

ABBREVIATIONS, & NAV TERMS

13-4

  FPL waypoint is locked

 - At least one flight plan 

(FPL) waypoint is locked because the waypoint 
has been removed from the current NavData card 
(database change), the data card is missing, or the 
data card has failed.

  FPL waypoint moved

 - The position data for 

one or more flight plan (FPL) waypoints moved at 
least 0.33 arc minutes in the current NavData card 
(database change).

  FPL waypoint was deleted

 - At least one flight 

plan (FPL) waypoint is no longer available when 
a new NavData card was installed (database 
change).

  G/S has failed

 - The GNS 430 has detected a 

failure in its glideslope receiver.  The glideslope 
receiver is not available and the unit should be 
returned to a Garmin dealer for service.

  G/S is not responding

 - Internal system-

to-system communication between the main 
processor and the glideslope receiver has failed.  
Operational status of the glideslope receiver is 
unknown and the unit should be returned to a 
Garmin dealer for service.

  G/S needs service

 - The GNS 430 has detected 

a failure in its glideslope receiver.  The glideslope 
receiver may still be usable, but the unit should be 
returned (at the earliest convenience) to a Garmin 
dealer for service.

  GPS has failed

 - The GNS 430 has detected a 

failure in its GPS receiver.  The GPS receiver is 
not available and the unit should be returned to a 
Garmin dealer for service.

  GPS is not responding

 - Internal system-

to-system communication between the main 
processor and the GPS receiver has failed.  
Operational status of the GPS receiver is unknown 
and the unit should be returned to a Garmin 
dealer for service.

  GPS needs service

 - The GNS 430 has detected a 

failure in its GPS receiver.  The GPS receiver may 
still be usable, but the unit should be returned (at 
the earliest convenience) to a Garmin dealer for 
service.

  GPS stored data was lost

 - Satellite almanac, 

ephemeris and time data have been lost due to 
a memory battery failure, system reset, or data 
expiration (data over six months old).

  Heading input failure

 - The heading selection 

on the external HSI’s (or CDI’s) OBS course 
selector cannot be read properly.  A Garmin dealer 
may need to check the installation.

  I

nside airspace

 - A GPS-calculated position lies 

within the boundaries of a special use airspace.  
This message is automatically disabled within 
30 nm of an arrival airport, when an approach is 
loaded.

  Invalid closest pt of FPL

 - A closest point 

cannot be created from the waypoint entered on 
the ‘Closest point of flight plan’ window.  This 
occurs when the selected waypoint is beyond the 
limits of all legs in the flight plan, too far away, 
or when a unique waypoint name for the closest 
point cannot be created.

  Invalid FPL modification

 - An attempt was 

made to modify the final course segment (FAF to 
MAP) of an instrument approach.  The GNS 430 
does not allow the modifications.

Содержание GNS 430











































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GNS 430

TRACKIMO UNIVERSAL TRACKER User Manual preview
UNIVERSAL TRACKER
Бренд: TRACKIMO Страницы: 19
Garmin echoMAP CHIRP 45 Series Owner'S Manual preview
echoMAP CHIRP 45 Series
Бренд: Garmin Страницы: 49
Magellan NAV 5000DLX User Manual preview
NAV 5000DLX
Бренд: Magellan Страницы: 88
Garmin Street Pilot 2720 Owner'S Manual preview
Street Pilot 2720
Бренд: Garmin Страницы: 52
Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM User Hardware Manual preview
USBL BROADBAND ACOUSTIC TRACKING SYSTEM
Бренд: Edgetech Страницы: 102
Flymaster NAV User Manual preview
NAV
Бренд: Flymaster Страницы: 66
Chinavision CVPL-TR22 User Manual preview
CVPL-TR22
Бренд: Chinavision Страницы: 17
Garmin GPS 18x LVC Technical Specifications preview
GPS 18x LVC
Бренд: Garmin Страницы: 37
ATP Electronics Photo Finder User Manual preview
Photo Finder
Бренд: ATP Electronics Страницы: 20
S-TEC ST-901 Pilot Operating Handbook preview
ST-901
Бренд: S-TEC Страницы: 34
PDQLogic QTrace User Manual preview
QTrace
Бренд: PDQLogic Страницы: 66
Blue Sky Network HawkEye Plus User Manual preview
HawkEye Plus
Бренд: Blue Sky Network Страницы: 34
Blumax GPS-4013 User Manual preview
GPS-4013
Бренд: Blumax Страницы: 23
i Luv Wireless KidsConnect KC2 User Manual preview
KidsConnect KC2
Бренд: i Luv Wireless Страницы: 8
Bikefinder PB-12 Quick Start Manual preview
PB-12
Бренд: Bikefinder Страницы: 7
REWIRE SECURITY DB3 User Manual preview
DB3
Бренд: REWIRE SECURITY Страницы: 122
Farnear Electronics FN01-4GWB Manual preview
FN01-4GWB
Бренд: Farnear Electronics Страницы: 19
Xeos Technologies Inc. Petrel User Manual preview
Petrel
Бренд: Xeos Technologies Inc. Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды