GNS 430 Pilot’s Guide and Reference
2-5
SECTION 2
COM
To select a COM frequency for any airport
in the database:
1) Turn the large
right
knob to select the NRST
Page Group.
2) Turn the small
right
knob to select the Airport
Frequencies Page (Figure 2-9).
Figure 2-9 Airport Frequencies Page
3) Press the small
right
knob to place the cursor
on the airport identifier field.
4) Use the small and large
right
knobs to enter
the identifier of the desired airport. Press the
ENT
Key when finished.
5) Turn the large
right
knob to highlight the
desired frequency.
6) Press the
ENT
Key to place the highlighted
frequency in the standby COM Window field.
Emergency Channel
The GNS 430’s emergency channel select provides
a quick method of selecting 121.500 MHz as the
active frequency in the event of an in-flight emergency.
Emergency channel select is available anytime the unit
is on, regardless of GPS or cursor status, or loss of the
display.
To quickly tune and activate 121.500:
Press and hold the
COM Flip-flop
Key for
approximately two seconds (Figure 2-10).
Figure 2-10 Emergency Channel Active
Содержание GNS 430
