Garmin GNS 430, Руководство и справочник пилота

Страница: 36 / 234

GNS 430 Pilot’s Guide and Reference
SECTION 3
NAV PAGES
3-2
3.3 DEFAULT NAV PAGE
The first NAV page is the Default NAV Page (Figure
3-3). This page may be quickly selected from any page by
pressing and holding the
CLR Key.
Figure 3-3 Default NAV Page
Course Deviation Indicator (CDI)
User-selectable
Data Fields
Active Leg of Flight Plan
TO/FROM Flag
Number of Pages in
Current Page Group
Position of
Current Page
within Current
Page Group
Current Page Group
The Default NAV Page displays a graphic course
deviation indicator (CDI) across the top of the page. Unlike
the angular limits used on a mechanical CDI coupled to
a VOR or ILS receiver, full scale limits for this CDI are
defined by a GPS-derived distance (0.3, 1.0 or 5.0 nm), as
indicated at both ends of the CDI. By default, the CDI scale
automatically adjusts to the desired limits based upon the
current phase of flight: enroute, terminal area or approach.
The pilot may also manually select the desired scale setting
as outlined in Section 10.4. The graphic CDI shows the
current position at the center of the indicator, relative to
the desired course (the moving course deviation needle).
As with a traditional mechanical CDI, when off course
simply steer toward the needle. The TO/FROM arrow in the
center of the scale indicates whether the aircraft is heading
TO (up arrow) or FROM the waypoint (down arrow).
NOTE: The GNS 430 always navigates TO
a waypoint unless the OBS switch is set
(preventing automatic waypoint sequencing),
or if the aircraft has passed the last waypoint
in the flight plan.
Directly below the CDI appears the active leg of the
flight plan, or the direct-to destination when using the
Direct-to Key. This automatically sequences to the next
leg of the flight plan as each interim waypoint is reached.
If no flight plan or direct-to destination has been selected,
the destination field remains blank.
The following symbols are used on the Default NAV
Page (directly below the CDI), to depict the ‘active leg’ of
a flight plan or direct to:
Direct-to a Waypoint
Course to a Waypoint, or Desired
Course between Two Waypoints
Procedure Turn
Procedure Turn
Vectors-to-Final
DME Arc to the Left
DME Arc to the Right
Left-hand Holding Pattern
Right-hand Holding Pattern