6
Section 2
Goodrich STORMSCOPE Interface
)
Displaying Storm Data on the Map Page
The Map Page displays cell or strike information using yellow lightning strike symbology overlaid on
a moving map. This added capability improves situational awareness, which in turn makes it much easier
for the pilot to relate storm activity to airports, navaids, obstacles and other ground references.
Storm data is displayed on the Map Page only if aircraft heading is available.
In normal operation, the current mode and rate are displayed in the top right corner of the Map Page.
The mode is described by the word “STRIKE” when in strike mode, or “CELL” when in cell mode.
The strike data display phases are:
1. Lightning Symbol (latest strikes; less than one minute; a black guard band is placed around the strike symbol
during the fi rst six seconds of display)
2. Large Plus “+” sign (more than one minute old)
3. Small Plus “+” sign (more than two minutes old)
4. Strike Data is no longer displayed (after three minutes)
Cell mode uses a clustering program to identify
clusters of electrical activity that indicate cells. Cell
mode is most useful during periods of heavy storm
activity. Displaying cell data during these periods frees
the user from sifting through a screen full of discharge
points and helps to better determine where the storm
cells are located.
Strike Rate
Storm Activity
Storm Data Displayed on the Map Page
Cell Mode
thirdparty.indd 6
3/12/2003, 4:13:17 PM
