manualshive.com logo in svg

Garmin GNC 300, Руководство пилота

Поделиться
Скачать
Garmin GNC 300 Скачать руководство пользователя страница 50

The 

airport runway page

displays runway designations, length, surface and

lighting for the selected airport, as well as ILS/localizer and/or pilot-controlled light-
ing frequencies.

To view the runway page from any of the airport information pages:

1. Rotate 

O

with the flashing cursor removed to display the runway page.

2. To view additional runway information, rotate 

K

with the flashing cursor removed. 

The scrolling arrow prompt, located beside the identifier field, indicates which direction to
scroll for additional runway information. 

If a localizer and ILS are used on the same runway, rotating 

K

will display 

both sets of information.

The following descriptions and abbreviations are used on the airport runway

page:

Runway surfaces:

•

hard - 

Hard (concrete, asphalt, etc.)

• 

turf -  

Turf (grass)

• 

seal -  

Sealed surface

• 

grav -

Gravel surface

• 

dirt - 

Dirt surface

• 

soft -  

Unknown soft surface

• 

unkn -

Unknown surface

• 

watr - 

Water landing site

Runway lighting:

•

pt lights - 

Part time lights

• 

ft lights -

Full time lights

• 

pc -         

Pilot controlled (with frequency)

• 

no lights -

No runway lighting

40

REFERENCE

Autostore ™ &

User Comments

SECTION

3

WPT KEY

Airport Runway Page

To view additional runways, rotate the inner knob
in the direction of the arrow prompts.

Airport Runway Page for KICT.

300  7/14/98 8:49 AM  Page 40

Содержание GNC 300















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды