Garmin ENDURO, Руководство владельца и краткое руководство по началу работы

Страница: 34 / 77

3
Select an option:
• To set and save a countdown timer for the first time, enter
the time, press MENU , and select Save Timer .
• To set and save additional countdown timers, select Add
Timer , and enter the time.
• To set a countdown timer without saving it, select Quick
Timer , and enter the time.
4
If necessary, press MENU , and select an option:
• Select Time to change the time.
• Select Restart > On to automatically restart the timer after
it expires.
• Select Sounds , and select a type of notification.
5
Press to start the timer.
Deleting a Timer
1
From the watch face, hold MENU .
2 Select Clocks > TIMERS > Edit .
3 Select a timer.
4
Select Delete .
Using the Stopwatch
1
From the watch face, hold MENU .
2 Select Clocks > STOPWATCH .
3 Press to start the timer.
4
Press LAP to restart the lap timer .
The total stopwatch time continues running.
5
Press to stop both timers.
6 Select an option:
• To reset both timers, press
DOWN .
• To save the stopwatch time as an activity, press MENU ,
and select Save Activity .
• To reset the timers and exit the stopwatch, press MENU ,
and select Done .
• To review the lap timers, press MENU , and select Review .
NOTE: The Review option only appears if there have
been multiple laps.
• To return to the watch face without resetting the timers,
press MENU , and select Go to Watchface .
• To enable or disable lap recording, press MENU , and
select Lap Key .
Adding Alternate Time Zones
You can display the current time of day in additional time zones
on the alternate time zones widget. You can add up to four
alternate time zones.
NOTE: You may need to add the alternate time zones widget to
the widget loop ( Customizing the Widget Loop , page 35 ).
1
From the watch face, hold MENU .
2
Select Clocks > ALT. TIME ZONES > Add Alt. Time Zone .
3
Select a time zone.
4
If necessary, rename the zone.
Editing an Alternate Time Zone
1
From the watch face, hold MENU .
2
Select Clocks > ALT. TIME ZONES > Edit .
3
Select a time zone.
4
Select an option:
• To enter a custom name for the time zone, select
Rename
Zone .
• To change the time zone, select Change Zone .
• To change the location of the time zone in the widget,
select Reorder Zone .
• To delete the time zone, select Delete Zone .
Navigation
Saving Your Location
You can save your current location to navigate back to it later.
NOTE: You can add options to the controls menu ( Customizing
the Controls Menu , page 36 ).
1
Hold LIGHT .
2
Select .
3
Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1 From the watch face, press .
2 Select Navigate > Saved Locations .
3
Select a saved location.
4
Select an option to edit the location.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
NOTE: You may need to add the Project Wpt. app to the
activities and apps list.
1 From the watch face, press .
2 Select Project Wpt. .
3
Press UP or DOWN to set the heading.
4
Press .
5
Press DOWN to select a unit of measure.
6
Press UP to enter the distance.
7
Press to save.
The projected waypoint is saved with a default name.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course.
1
From the watch face, press .
2
Select an activity.
3
Hold MENU .
4
Select Navigation .
5
Select a category.
6 Respond to the on-screen prompts to choose a destination.
7 Select Go To .
Navigation information appears.
8 Press to begin navigation.
28 Navigation