3
Wrap the strap around your chest, and
connect the strap hook to the loop
.
NOTE:
The care tag should not fold
over.
The Garmin logos should be right-side
up.
4
Bring the device within 3 m (10 ft.) of
the heart rate monitor.
After you put on the heart rate monitor, it is
active and sending data.
Installing the Cadence Sensor
NOTE:
If you do not have this sensor, you
can skip this task.
TIP:
Garmin recommends you secure your
bike on a stand while installing the sensor.
1
Select the band size that fits your
crank arm securely.
The band you select should be the
smallest one that stretches across the
crank arm.
2
On the non-drive side, place and hold
the flat side of the cadence sensor on
the inside of the crank arm.
3
Pull the bands around the crank
arm, and attach them to the hooks
on the sensor.
4
Rotate the crank arm to check for
clearance.
The sensor and bands should not
contact any part of your bike or shoe.
NOTE:
The LED flashes green for five
seconds to indicate activity after two
revolutions.
5
Take a 15 minute test ride and inspect
the sensor and bands to ensure there
is no evidence of damage.
Installing the Speed Sensor
NOTE:
If you do not have this sensor, you
can skip this task.
10
Quick Start Manual
Содержание EDGE 840
Страница 1: ...EDGE 840 Quick Start Manual...