Garmin EDGE 840, Быстрый старт

Страница: 4 / 13

3
Place the rubber pad around the
handlebar:
• If the handlebar diameter is
25.4 mm, use the thicker pad.
• If the handlebar diameter is
31.8 mm, use the thinner pad.
4
Place the handlebar connector around
the rubber pad.
5
Replace and tighten the screw.
NOTE:
Garmin
®
recommends
tightening the screw so the mount is
secure, with a maximum torque
specification of 7 lbf-in. (0.8 N-m). You
should check the tightness of the
screw periodically.
6
Align the tabs on the back of the Edge
device with the bike mount notches
.
7
Press down slightly and turn the Edge
device clockwise until it locks into
place.
Installing the Mountain Bike Mount
NOTE:
If you do not have this mount, you
can skip this task.
1
Select a secure location to mount the
Edge device where it does not
interfere with the safe operation of
your bike.
2
Use the 3 mm hex key to remove the
screw from the handlebar
connector .
4 Quick Start Manual