Garmin ECHOMAP Ultra Series Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 132

background image

Capturing Screenshots

1 Insert a memory card into the card slot.
2 Select Settings > Screenshot Capture > On.
3 Go to a screen you want to capture.
4 Hold Home for at least six seconds.

Copying Screenshots to a Computer

1 Remove the memory card from the chartplotter, and insert it into a card reader that is attached to a

computer.

2 From Windows Explorer, open the Garmin\scrn folder on the memory card.
3 Copy the image file from the card and paste it to any location on the computer.

Troubleshooting

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be a few causes. If the device has moved a large
distance since the last time it has acquired satellites or has been turned off for longer than a few weeks or
months, the device may not be able to acquire the satellites correctly.
• Ensure the device is using the latest software. If not, update the device software (

Updating the Device

Software Using a Memory Card, page 115

).

• Make sure the device has a clear view of the sky so the antenna can receive the GPS signal. If it is mounted

inside of a cabin, it should be close to a window so it can receive the GPS signal.

My device will not turn on or keeps turning off

Devices erratically turning off or not turning on could indicate an issue with the power supplied to the device.
Check these items to attempt to troubleshoot the cause of the power issue.
• Make sure the power source is generating power.

You can check this several ways. For example, you can check whether other devices powered by the source
are functioning.

• Check the fuse in the power cable.

The fuse should be located in a holder that is part of the red wire of the power cable. Check that the proper
size fuse is installed. Refer to the label on the cable or the installation instructions for the exact fuse size
needed. Check the fuse to make sure there is still a connection inside of the fuse. You can test the fuse using
a multimeter. If the fuse is good, the multimeter reads 0 ohm.

• Check to make sure the device is receiving at least 12 Vdc.

To check the voltage, measure the female power and ground sockets of the power cable for DC voltage. If the
voltage is less than 12 Vdc, the device will not turn on.

• If the device is receiving enough power but does not turn on, contact Garmin product support.

116

Appendix

«
...
122
123
124
125
126
...
»

Содержание ECHOMAP Ultra Series





































































































































Отзывы:

Нет отзывов

Похожие инструкции для ECHOMAP Ultra Series

Бренд: Navman Страницы: 37

Бренд: Navman Страницы: 64

Бренд: Navitel Страницы: 21

DispoPilot.Guide

Бренд: FLEETBOARD Страницы: 32

Бренд: Garmin Страницы: 2

Бренд: Thales Страницы: 234

Бренд: CarTrek Страницы: 9

CS-TUND09 Toyota Sequoia

Бренд: CarShow Страницы: 11

Бренд: Carscop Страницы: 12

ATS-6501 T-Flex

Бренд: Microsemi Страницы: 222

Бренд: Connectec Страницы: 13

Бренд: NorthStar Страницы: 85

Бренд: Satguide Страницы: 19

NavAtlas XNAV9525

Бренд: Dual Страницы: 36

Бренд: Eelink Страницы: 9

Бренд: Eelink Страницы: 14

Бренд: GoFind Страницы: 9

Бренд: Sonocaddie Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды