190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
83
ENGINE INDICATION SYSTEM
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
3.3 LEANING ASSIST MODE
NOTE
:
The pilot should follow the engine manufacturer’s recommended leaning procedures in the Aircraft
Flight Manual Supplement (AFMS).
A leaning assist function is available on the Engine Page to assist in the leaning process.
Accessing Leaning Assist Mode:
1)
Press the
ENGINE
Softkey to open the Engine Page.
2)
Press the
LEAN
Softkey to identify peaks.
3)
Press the
LEAN
Softkey again to exit Leaning Assist Mode.
When the
LEAN
Softkey is pressed, the system initially highlights the number and EGT readout of the cylinder
with the hottest EGT. The
∆
Peak temperature is the difference between the peak temperature and the present
temperature for the peaked cylinder. When the first peak is detected, “1st” is annunciated below that cylinder’s
EGT bar and the temperature is marked in light blue on the graph.
The system continues to detect peak EGTs for each cylinder lean of peak as the fuel flow is decreased, and the
peak of each cylinder’s EGT is indicated by a light blue marker on the graph. Once all cylinders are lean of peak,
the last cylinder to peak is denoted by the “Last” annunciation below its bar on the graph.
Figure 3-7 Leaning Assist Mode
Light Blue Bar
Represents Peak
Indicates First
Cylinder to Peak
Indicates Last
Cylinder to Peak
Light Blue Bars
Represent Peaks
Current Difference
from Peak Temperature
(Selected Cylinder)
Содержание Diamond DA40
Страница 1: ...System Software 0321 20 or later G1000 Integrated Flight Deck Pilot s Guide...
Страница 2: ......
Страница 537: ......